How to Troubleshoot & Replace Whirlpool AP5692067 / W10599356 Valve

Started troubleshooting issues and doing some online research. Discovered possible inlet valve malfunction. Discovered your website and called to speak with someone for part number and model clarification. Sales representative was awesome! Of course being a family of four I was not looking forward to being with out a washer for almost 4 days and it being late Thursday night when it happened I had my doubts I would see the part before Tuesday. Was extremely surprised that the part was delivered Saturday morning not a full 36 hours after having ordered the part and was back up and running within about 20 minutes. I am so extremely pleased and grateful I stumble onto your site. 

Replaced inlet valve assembly of Whirlpool Duet clothes washer. Disconnected supply hoses at machine. Easy access inside; removed three screws to remove top panel of cabinet. Unplugged three electrical connectors, retracted hose clamps at the soap/bleach dispenser, and removed one Torx screw to remove old valve assembly. Reversed procedure to install new assembly. About 1 hour total, working carefully to avoid damage -- less time than I expected. Washer functions normally; no leakage. 

Changed inlet valve and replaced door hinge. A lot of screws to remove front door panel to allow access to remove hinge. As with all hoses that have been connected for a long time not easy to remove them from water inlet/soap tub. 

Replaced the Water Inlet Valve Assembly. 

Water level overfilling. Visibly seeing water leaking past the door back into tub when washer is off. To clear the code / unplug washer for a minute then plug back in, start cycle and monitor to see if code re appears. In my instance the water would continue to leak past even when washer cycle was done. I replaced water inlet valves (dispenser valves). 

Ordered a new one and replaced it. 

Ordered a replacement inlet valve 

Yes. Less than 45 min of work 

Replaced the water inlet valve