For some time clothes were getting caught in the plastic around the door and then spun up and destroyed. I filled what seemed to be the gaps with JB Weld and that worked for a while. Then the dryer started to chirp, an annoying sound. I knew it was time for a repair. I took off the 3 screws on the cover of the control panel, then the two screws that held the top on. I removed 2 more that held the control panel itself on. This allowed me to remove the 4 screws that held the front on. When I did this it was obvious that the top bearing was worn beyond repair. I ordered the bearing, slides and seal. When they came in it took 5 minutes to put the parts in and put the machine back together. Super simple. All I needed was a phillips screwdriver. If I can do it anyone can.