Braced the door up with two pieces of wood and removed the lower door hinges. One hinge fastened is attached up into the lower door and the other is attached to the cabinet. The door requires partial removal of the doorstop so it can be rotated out of the way. The new replacement closer kit has plenty of spare parts no instructions. There is a video but key information is not given. The plastic replacement hinge parts have an oblong hole where the screws secure the pieces. Placement off the parts requires leaving the parts loosely attached until the proper mounting position is obtained. Then the assembly needs to be Thacker apart so the screws can be secured so both parts are in alignment. There are two friction pads, one for door, that must be installed on the lower cabinet bracket to assist with keeping the lower door closer from rotating when the door is fully opened.