Nathan B Columbia City , IN February 16, 2024 One flap on the upper rack gasket broke off and remaining one wouldn't close completely Can't purchase the gasket by itself, so this replaces the supply tube and top spinner. Remove the upper rack. Remove main sprayer by turning nut clockwise. Unclip the two retainers on the top and rear of the washer, and remove the water supply tube by turning it clockwise. Separate this tube from the bottom tube, replace it with the new, and reinstall everything. Lining up this new tube with the retainer clips will take a couple of tries to get it properly seated. Would recommend unscrewing the filter and doing a deep clean while things are disassembled if you didn't already do that while investigating the problem. Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes