Pulled back water pump hold down clips,lifted water pump off motor shaft and tied pump to leg to keep it put of the way. Removed two screws on motor with a 1/4 " socket and snapped off the hold down clips on motor. Removed old motor. Installed the new drive couplers on new motor and set them flush with a socket no bigger than the drive shft. Removed 4 old motor rubber standoffs,cleaned them and treated them with silicone installed on new motor . Making sure all new coupler parts were aligned with new motor I placed motor on mounting bracket,gave it a wiggle until it fell into place checking by turning coupler until agitator turned. Installed all above brackets