At first, I thought the ignitor was fine because I could see it glowing. I thought it could be the electronics since the ignitor seemed to work. The closest Frigidaire repair shop couldn't get to me for over a month. After a little reading, I found out that the ignitor can still glow but doesn't draw enough current to enable the gas to the burner. I took the chance that it was the ignitor and not the electronics. The AppliancePartsPros.com video was very easy to follow. The part was an exact match and very easy to replace. The hardest part was disconnecting the ignitor connector from the stove. I used a small thin blade screwdriver to release the connector after looking at the new one to see how it latches. The only thing I needed many may not have is a square head nut driver which fortunately I happened to have.