It would have been nice to have a repair manual to show how things are held together. After figuring out that the knob cover had to come off, 3 screws held it on, to access 2 screws that had to come out before the top of the range would hinge open, it was a piece of cake. Everything I found on the internet said that the top would hinge open by prying it up at the front corners with a screw driver, not the case. I had to take a gas line apart that held the burner assembly in so I could get a screw out that twisted off and also get at the screw that holds the igniter in place. The spade connector came apart using a pair of needle nose pliers. Putting it all back together went very well.