I would have to keep un plugging the unit from the outlet. I noticed that during the wash cycle, when I opened the door the wash cycle would not stop as it did before. I suspected the door latch switch to be the issue. Once I ordered it, I replaced it by removing the torx screws from the inside of the dishwasher door. Then I un plugged the door latch switch and the control panel to remove the stainless steel door cover. Removal of the switch was easy as prying tabs. I replaced the switch with the new one and plugged all the terminals back. I then replaced the stainless steel door back on and put the torx screws back (remember that the torx screws in the top part of the door are larger than the rest of the sides). I tested the unit and it work fine.