Used shaft seal and push-on clip purchased from AppliancePartsPros. Went exactly as the repair video described. However, at first, I couldn't get the c-clip back on the shaft after replacing the seal. It turned out that I didn't have the push-on (Tinnerman) clip pushed on all the way. Until it was in the groove in the shaft. The clip is very tight and the shaft has some in-and-out play, so you may need to grasp the end of the shaft with pliers and use needle-nose pliers to push the nut all the way on until it rotates freely. Once I did that the installation went as described in the video.