I ordered the part from AppliancePartsPros.com and received a replacement part within a couple of days! That was a real plus in my book!
I followed the featured story on your website on replacing the bottom oven ignitor with a little twist on the installation of the replacement ignitor. After getting access to the ignitor it took me a while to remove the ignitor from the manifold. Had to use a 1/4" small ratchet holder to remove mounting screws. Knowing the installation would take just as long for those two fasteners. I removed two mounting screws securing the back of the manifold with a 1/4" extension and one in the front to take it out entirely. Disconnected the wire connector from the gas valve and the other wire from the back to the failed ignitor. With manifold out, mounted new ignitor with ease; cut respective wires to length and reconnected with nuts provided in repair packet. Guided wires through the back of oven and valve and connect as required. Reinstalled manifold and secured hardware. Reinstalled all removed panels and lower drawer. Electrical power was not disconnected nor gas turned off. It was a quick installation. Turn on the oven and the ignitor worked fine.