Elizabeth was able to get me the correct part along with the service manual to make the switch. I also watched your video on changing to LP from NG and kind of reverse engineered it. Nobody has the video or instructions on going LP to NG, just the other way around. I would add to the video that you will want to vacuum a pound or two of lint out of the dryer if it has been in use for any length of time! You do have to pretty much disassemble the whole dryer to make the switch, which is a bit of a pain, but the procedure is relatively straight forward, especially with the excellent detail in your video. Also no one explains how far the mixer screw needs to be backed out when changing to NG. I found that there does seem to be a stop when you get it fully open, but I would recommend using fingers only to turn it against the stop...the screw is plastic, so use care.