Used Google to troubleshoot the issue. Inside the freezer I took the back off. Noticed two things. The evaporator motor was not turning and the top half of the coils were frozen over. Obvious fan not spinning issue. I felt the motor and it was hot. Spun the fan it it started spinning. Put it all back together. Ran OK for 5-6 more days then same issue. I ordered the new motor and then and spun the fan again. It lasted for 2 days. Had to spin the fan to get it going 2 more times until the new motor came. Easy install. 12 screws for the back of the freezer. Remove 3 wires but wrote down the colors to connector. Removed two screws for the housing bracket. After install the fan would slide down the motor shaft while spinning and click against the housing. I had to wrap a piece of electrical tape on the shaft to prevent the fan from slipping down. 10 days now and all is well.