Unplugged the dryer and removed the lint tube. Removed the lint exhaust tube and the repair/entry port on the right side. Turned the dryer on its left side to get better access to the Thermal Fuse. Removed the 2 wires connected to the fuse. Removed the 2 screws holding the fuse (hard to get out with one hand). Placed the new fuse and replaced the 2 screws (again, hard to get to with one hand, so it helped to have magnetized philips head screwdriver). Replaced the 2 wires. Replaced the repair/entry port. replaced the lint exhust tube and reconnected the lint tube. Repositioned the dryer and plugged it in.