For me, the hardest part was getting the dishwasher out from underneath the counter due to its difficult installation. I found water was spraying out from the diverter. The gasket between the diverter valve and pump was completely worn out. First, remove the bottom drawer and spray arm from inside. Then flip it over to access the bottom. I found it was easier to remove the pump, to access the diverter valve. I attached the new diverter valve to the pump using the clamp provided. Then fit the attached diverter and pump back to the dishwasher, clamp the pump, and tighten it all up. Turned it back over, no more leaks.