Removed and replaced inlet valve. Tip....some people had trouble with the 2 small screws that hold the bracket of the inlet valve to the dishwasher. Borrow or purchase a 1/4" nut driver for the job, makes it much easier. When replacing the bracket it is easier to partially insert the 1 screw toward the back of the dishwasher first. You will notice that the top screw holes are half circles allowing you to insert the back screw first and then tilt the bracket into the screw and tighten it. Then insert the front screw and tighten that one. It is a very tight space under there and difficult to see what you are doing. Other than that the job it fairly easy if you are familiar with hand tools. Part from AppliancePartsPros was perfect replacement, saved me from purchasing a new dishwasher.