Parts for Ge ZIFP360NXARH: 01 - Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

This refrigerator door gasket creates a tight, reliable seal between the door and cabinet. Replacing a worn gasket helps keep cold air in, block warm, humid air, and restore proper temperatures and efficiency.

• Forms an airtight seal around the door perimeter to maintain correct internal temperatures
• Helps reduce frost, condensation, and energy use caused by air leaks
• Resolves poor sealing from tears, warping, cracks, or compression set
• Can help with symptoms like doors not closing fully or popping open and warm spots near the door

• Unplug the refrigerator and clear items from the door before service
• Warm the new gasket in hot water or with low, indirect heat to relax and shape it
• Remove the old gasket from the retaining channel; press the new gasket in place starting at the corners and working evenly around
• Use gentle heat to eliminate gaps and ensure a consistent seal

Color: white

This deep fresh food door bin installs on the right-hand refrigerator door to provide sturdy storage for taller containers and everyday items. Replace a broken or missing bin to restore safe, organized space on your refrigerator door.

• Mounts to the right-side fresh food door to hold and organize items
• Deep profile adds capacity for taller containers and bottles
• Replace when the bin is cracked, warped, has broken tabs, or won't stay seated
• Common symptoms: bin falls out, leans, is loose, or is missing

• Empty the old bin; lift straight up to remove from the door liner
• Align the new bin's hooks with the slots and press down until fully seated
• Handle gently; allow plastic to warm to room temperature to reduce cracking risk
• Do not force into place; ensure correct right-side orientation

Color: white

This 1/4-20 x 3/8 hex-head screw secures components on compatible appliances, restoring proper fit and preventing looseness. Use it when a worn or missing fastener causes rattling, poor alignment, or parts that won't stay in place. What it does:

• Fastens panels, brackets, or assemblies where a 1/4-20 thread is specified
• Replaces stripped, corroded, or missing screws that cause vibration or rattling
• Restores proper alignment and secure mounting of affected components
• Provides the correct thread pitch and head style for a firm hold

• One 1/4-20 x 3/8 hex-head screw

• Use the matching driver or socket; avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance before accessing internal components
• If replacing multiple fasteners, swap all like screws for even fit and torque

This screw set contains #10-32 thread fasteners used to secure appliance panels and components. It provides direct-fit replacement screws to restore proper fastening and stop loose or rattling parts. What it does:

• Replaces missing or damaged #10-32 screws used on appliances
• Secures panels, brackets, trim pieces, and internal components
• Helps eliminate rattling, vibration noise, and loose fittings
• Restores factory fastening for safe, stable operation

• Disconnect power and water before servicing the appliance
• Keep small parts organized and use a magnetic tray to avoid loss
• Use the correct driver to avoid stripping screw heads; do not overtighten