Parts for Kenmore 795.68002210 (79568002210, 795 68002210): Door Parts

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This door gasket assembly seals the washer door to keep water in the tub and help prevent leaks, odors, and mold buildup. It restores a tight door seal for reliable washing performance and cleaner laundry results. What it does:

• Seals the washer door to prevent water from leaking during wash and rinse cycles
• Helps block dirt and detergent residue from entering the cabinet, reducing odor and mold risk
• Keeps clothes contained in the drum for safe, effective cycles
• Restores proper door contact where a torn, warped, or missing gasket causes leaks or smells

• Disconnect power and water supply before starting any repair
• Drain the washer and open the door fully; handle the gasket and any door glass carefully
• Inspect mounting surface and replace any damaged retainer clips; ensure gasket lips seat evenly into the door and tub groove

This door basket snaps onto the inner door to hold jars, bottles, and condiments. Replacing a cracked or missing bin restores secure, organized storage and helps prevent items from tipping or falling when the door opens.

• Mounts on the refrigerator door to provide extra shelf storage
• Helps keep bottles and condiments upright and accessible
• Replaces bins with cracked plastic or broken locking tabs
• Fixes issues where the bin won't stay seated or falls off the door

What's included: 1 door basket Install notes:

• Remove contents and lift the old bin straight up to release from the door liner
• Align the new bin's rear hooks with the slots and press down until fully seated
• Verify placement with your model's parts diagram, as some positions use specific bins
• Let cold plastic warm to room temperature and avoid forcing to prevent cracks

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

The Door Stopper is an OEM part for LG refrigerators. It is a component located at the top of the refrigerator door frame. The stopper functions to securely cushion the door in the open position, preventing damage from accidental closing. 

Causes of a faulty stopper include wear from the door repeatedly contacting the part during normal use. Forceful door incidents could also bend or loosen the stopper over time.

Symptoms of a problematic door stopper are:

• The door not staying firmly in the open position
• Increased noise or vibration from the door while open
• Potential damage from an unrestrained door closing

This OEM LG part is also compatible with some Kenmore models.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This inner door shelf replaces a cracked or broken refrigerator door basket so you can safely store bottles and small items. It restores secure storage and keeps the door organized without rattling or falling items. What it does

• Replaces a damaged or cracked door basket that no longer holds items securely
• Restores proper storage on the refrigerator door and prevents items from slipping or falling
• Reinstates mounting stability if original shelf tabs were broken or worn
• Reduces rattling and improves overall organization inside the door

• Unplug the appliance or disconnect power before starting any repair
• Empty the door compartment and remove any remaining clips or fasteners from the old basket
• Align the replacement basket with the door mounting points and snap or slide into place until securely seated
• If mounting tabs are broken, inspect adjacent hardware and replace any additional damaged clips before use

The Door Basket Assembly is an OEM component for LG refrigerators. It is located within the fresh food doors that securely hold bottles and containers of varying sizes.

Symptoms of a bad door basket assembly include:

• Items failing to remain securely placed or tipping easily within
• Warping or sagging basket components allowing gap openings
• Loose basket fittings inhibiting proper installation or removal
• Sections detaching or coming apart at seams over time

Causes can be normal wear and tear stresses from years of door openings/closings or impact damage.

This OEM LG part can also be used on Kenmore/Sears appliances. 

This handle assembly replaces a damaged or worn refrigerator door handle to restore safe, reliable grip and smooth door operation. It provides a direct-fit replacement to help you open and close the door securely. What it does:

• Replaces a cracked, broken, loose, or missing refrigerator door handle
• Restores a solid grip and proper leverage for opening and closing the door
• Helps prevent further damage to the door trim from makeshift handles
• Supports correct door alignment and user control during normal use

• Use basic hand tools; avoid overtightening fasteners to prevent damage
• If accessing electrical components, unplug the appliance or turn off power at the breaker before beginning
• Keep removed fasteners and parts in a safe place for reassembly

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.