Parts for Kenmore 795.68039210 (79568039210, 795 68039210): Door Parts

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This door gasket assembly seals the refrigerator door to the cabinet, keeping cold air in and humid room air out. Replace a torn or deformed gasket to restore a tight seal, stable temperatures, and reduce frost or condensation.

• Creates an airtight seal around the door perimeter
• Helps maintain proper temperatures and consistent cooling
• Reduces warm-air leaks that lead to frost or condensation
• Common symptoms: torn/warped gasket, visible gaps, door not closing flush, or temperature swings

• Disconnect power before servicing
• Let the new gasket warm to room temperature; use warm water or gentle low heat to relax folds—do not overheat
• Remove the old gasket and press the new gasket fully into the door channel, ensuring corners seat properly
• Close the door and check contact all around; work the gasket as needed until it seals evenly

This is a door basket for refrigerators. The purpose of a door basket is for additional storage and organizing within refrigerators unit. These are manufactured out of a clear plastic material. These door baskets are very easy to replace and simply slide in and out of the fridge. The entire replacement process takes less than 15 minutes to complete.A new door basket may be needed if the original is cracked, broken, or damaged in any way. Over time, the clear plastic may begin to get brittle after being in cold temperatures. If the clear plastic begins to discolor, the user may wish to replace the door basket for cosmetic purposes.This door basket is a genuine OEM LG part. It is sold individually. This specific door basket is compatible with refrigerators that are manufactured by the LG brand and the Kenmore brand.

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

The Door Stopper is an OEM part for LG refrigerators. It is a component located at the top of the refrigerator door frame. The stopper functions to securely cushion the door in the open position, preventing damage from accidental closing. 

Causes of a faulty stopper include wear from the door repeatedly contacting the part during normal use. Forceful door incidents could also bend or loosen the stopper over time.

Symptoms of a problematic door stopper are:

• The door not staying firmly in the open position
• Increased noise or vibration from the door while open
• Potential damage from an unrestrained door closing

This OEM LG part is also compatible with some Kenmore models.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

A replacement door gasket assembly that restores a tight refrigerator door seal to help maintain interior temperature and reduce energy loss. Fits specific LG refrigerator doors; replaces torn, cracked or hardened gaskets. What it does:

• Seals the door edge to keep cold air in and warm air out
• Helps stop frost buildup, condensation, and uneven cooling
• Reduces compressor run time caused by air leaks
• Prevents food spoilage linked to poor door sealing

• One door gasket assembly

• Disconnect power and empty the door before starting the repair
• Clean the gasket channel and mating surface before installing the new seal
• Align the gasket evenly around the door; avoid forcing or stretching

The Door Basket is an OEM accessory specifically designed for LG refrigerator doors containing vegetable drawers. This hanging basket provides auxiliary storage directly above crisper bins.

Causes of a bad door basket can include wear and tear over time compromising the mesh material, or damage from overloading reducing structural integrity.  

Symptoms of a bad door basket include:

• Holes or tears reducing usable capacity   
• Detached fasteners slipping off mounting brackets
• Warped contours no longer remain properly installed
• Insecure attachment inhibiting safe door openings  

Replace yours today with this genuine OEM LG basket to maximize organizational convenience. Sturdy brackets produce a snug, stable fit. Compatible with Samsung, GE, and Frigidaire refrigerators featuring dual-drawer doors, this upgrade complements any modern kitchen setup. Reliable performance preserves aesthetic appeal.

The Door Basket is an OEM part for LG refrigerators. It is a convenient storage solution located on the door, designed to hold smaller items such as condiments, bottles, or jars. This basket allows for easy access and organization, making it simpler to find and retrieve items stored within the door.

Causes of a bad part can include repeated impact or mishandling, exposure to excessive weight or force, or general wear and tear over time.

Symptoms of a bad Door Basket include:

• Cracks or damage to the basket itself
• Difficulty sliding the basket in and out of the door
• The basket becoming detached or falling out of the door
• Excessive wear or loosening of the mounting hardware

This OEM LG part is also compatible with some Kenmore models.

The Door Basket is an OEM replacement part for LG refrigerators. It hangs inside the refrigerator door and provides organization for condiments, eggs, and other small items that need quick access. The door basket measures approximately 27" x 5" x 5".

Causes of a bad door basket can include broken or damaged wires from overloading or repeated impact within the refrigerator door. The organizing bins or supports inside may also become misshapen over time.

Symptoms of a bad door basket include:

• Items inside are no longer being contained and falling out
• Difficulty seeing contents due to partial collapse of the basket structure

This LG replacement is also compatible with Kenmore models that use LG components. 

This handle assembly replaces a broken, loose or worn refrigerator door handle so you can open and close the door safely and restore the appliance's appearance. It fits the factory mounting points for a secure replacement. What it does:

• Replaces damaged or cracked door handle hardware to restore grip and door operation
• Provides a stable mounting point so the door opens and closes without wobble
• Returns the finished look of the appliance when the original handle is scratched or chipped
• Helps prevent injury or food loss caused by a failing or loose handle

• Disconnect power to the appliance or unplug before working on doors to avoid injury
• Most installs require removing the door trim or access panel and fasteners; keep track of screws
• Use a soft cloth to protect the finish during installation and align the handle before tightening

A replacement hinge cap that covers and protects the upper door hinge, restoring a finished look and helping keep the hinge area free of debris. Durable plastic restores appearance and prevents direct wear on the hinge. What it does:

• Covers the exposed upper door hinge to protect it from dirt, dust and moisture.
• Helps prevent cosmetic damage to the door edge by shielding the hinge.
• Replaces cracked, broken or missing caps that leave the hinge exposed.
• Can reduce rubbing or noise caused by a damaged or misaligned cap.

• Typically snaps into place; basic hand tools may be helpful to remove the old cap.
• Support the door or follow manufacturer guidance if hinge removal or adjustment is needed.
• Inspect surrounding hinge components for wear when replacing the cap.

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.