Parts for Kenmore 795.78023310 (79578023310, 795 78023310): Door Parts

This door gasket assembly replaces a worn or damaged refrigerator door seal to help maintain an airtight closure and consistent cooling. Restores proper sealing to reduce frost buildup and improve temperature control. What it does:

• Creates an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Reduces strain on the compressor by improving energy efficiency when sealing is restored
• Common symptom: visible cracks, tears, gaps, or a door that fails to close tightly

• Disconnect power to the appliance before beginning any repairs
• Remove the old gasket carefully to avoid damaging the door finish or retainer; warm or softening the gasket can ease removal
• Align the new gasket evenly and press into the retainer; some models use screws or clips

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

This door gasket assembly is the replacement rubber seal that fits around the appliance door to help maintain an airtight closure and consistent internal temperature. Replacing a damaged gasket restores proper sealing and helps reduce energy loss. What it does:

• Creates a tight seal between the door and cabinet to keep cold air in and warm air out
• Helps prevent frost buildup and uneven cooling in the fresh-food/freezer compartment
• Reduces energy use caused by gaps or leaks around the door
• Stops drafts, moisture, and food spoilage associated with a failing seal

• One door gasket assembly

• Disconnect power to the appliance before starting any repair
• Remove the door or door trim as needed per your model's service instructions to access the gasket mounting area
• Clean the gasket channel and door surface before installing the new seal for a secure fit
• After installation, inspect the perimeter for uniform contact; allow the gasket to settle and recheck the seal after 24 hours

A replacement pitcher guide that secures the water pitcher or pitcher-style container in the refrigerator door, helping keep the pitcher aligned and stable for smooth door operation and organized storage. What it does:

• Holds and aligns the refrigerator pitcher so it sits securely in the door bin.
• Reduces pitcher movement, rattling and tipping that can occur when opening or closing the door.
• Prevents the pitcher from shifting and potentially obstructing the door or other bins.

• Often snaps into the door bin or slides into a track; you may need to remove the bin or liner to access the guide.
• Use basic hand tools if required and avoid forcing parts to prevent damage.
• Follow the refrigerator service manual or OEM instructions for model-specific removal/installation steps.
• Disconnect power or follow safety guidance in the service manual when working near electrical components.

This door basket assembly replaces a cracked, broken or loose refrigerator door bin to restore secure storage for bottles, jars and small containers. Durable plastic construction mounts to the inner door shelf. What it does:

• Replaces a damaged or missing door bin that won't hold items securely
• Restores organized storage on the refrigerator door for bottles and containers
• Secures to the door using factory mounting tabs to prevent shifting or falling
• Helps prevent spills and lost storage capacity caused by cracked bins

• Remove all items from the door shelf before installing the new basket.
• Align the basket's mounting tabs with the door slots, then press until it snaps into place; do not force broken tabs.
• Inspect door mounting points for damage; replace any broken clips or supports as needed.
• Wear gloves to protect hands from sharp edges and broken plastic during removal.

This Door basket is the replacement door insert that holds and secures items in the appliance door, restoring safe storage and proper closure. Designed to replace a cracked, broken, or missing door basket. What it does

• Provides a molded storage pocket inside the appliance door so small items stay in place.
• Restores proper alignment and fit of the door interior when the original basket is damaged.
• Helps prevent items from shifting, rattling, or falling out during use.
• Commonly replaced when the basket is cracked, warped, or detached from the door.

• One door basket.

• Disconnect power and follow the appliance service manual before beginning repair.
• Removal/installation may require removing the door trim or inner liner—support the door to prevent damage.
• Wear gloves to protect against sharp edges and handle plastic clips carefully to avoid breakage.

The Door Basket is an OEM replacment part for LG French door refrigerators. It is a removable, flexible storage basket mounted inside the refrigerator door panel. The basket provides easy access to commonly used ingredients directly from the door.

Causes of a failing basket can include cracked or broken mounting clips over time. 

Symptoms of an inadequate basket include:

• Inability to securely hold contents inside the fridge door 
• Detachment from fasteners allowing it to dangle
• Holes or damage reducing usable storage space

This OEM LG replacement basket is also compatible with some Kenmore models.

The Door Closing Cam is an OEM part for LG refrigerators. This part ensures the refrigerator door closes smoothly and securely. It helps guide the door into the correct position and ensures a tight seal, which is essential for maintaining the internal temperature and efficiency of the appliance.

Causes of a bad door closing cam can include wear and tear over time, damage from repeated use, or accidental impacts that can misalign or break the cam. 

Symptoms of a bad Door Closing Cam include:

• The door not closing properly or securely
• Difficulty in opening or closing the door
• Unusual noises when operating the door
• Misalignment of the door

This OEM LG part is also compatible with some Kenmore models.

This is the small trim cap that snaps over the end of a refrigerator door handle. It finishes the handle, covers the mounting hardware, and helps keep the handle secure and looking clean.

• Covers exposed door-handle screws and mounting points
• Restores a finished appearance if the original cap is missing or damaged
• May help reduce handle looseness if the old cap no longer held properly
• Common symptoms: missing end cover, visible handle screws, loose or rattling handle

• Unplug the appliance before starting and open the door for access
• Remove the old cap by gently prying at the seam; avoid scratching the door finish
• Align the new cap with the handle end and press until it snaps fully into place
• If required, tighten handle mounting screws before installing the cap

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.