Parts for Kenmore 795.78029310 (79578029310, 795 78029310): Door Parts

This door gasket assembly seals a refrigerator door to help maintain an airtight cold compartment and reduce energy loss. It restores a tight seal so the appliance cools more efficiently and limits moisture intrusion. What it does:

• Creates an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps reduce condensation, frost buildup, and compressor run time caused by a leaking seal
• Prevents food spoilage by maintaining steady internal temperatures
• Replaces torn, warped, or hardened door gasket surfaces that no longer seat properly

• Disconnect power to the appliance before beginning work to avoid electrical hazards
• Remove door trim or fasteners as required for your model to access the gasket retaining channel
• Warm or slightly flex the gasket as needed to help seat it into the door channel; follow OEM instructions for proper alignment
• Inspect the door sealing surface and clean before installation; ensure the gasket seats evenly around the full perimeter

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

A replacement pitcher guide that secures the water pitcher or pitcher-style container in the refrigerator door, helping keep the pitcher aligned and stable for smooth door operation and organized storage. What it does:

• Holds and aligns the refrigerator pitcher so it sits securely in the door bin.
• Reduces pitcher movement, rattling and tipping that can occur when opening or closing the door.
• Prevents the pitcher from shifting and potentially obstructing the door or other bins.

• Often snaps into the door bin or slides into a track; you may need to remove the bin or liner to access the guide.
• Use basic hand tools if required and avoid forcing parts to prevent damage.
• Follow the refrigerator service manual or OEM instructions for model-specific removal/installation steps.
• Disconnect power or follow safety guidance in the service manual when working near electrical components.

This door basket assembly replaces a cracked, broken or loose refrigerator door bin to restore secure storage for bottles, jars and small containers. Durable plastic construction mounts to the inner door shelf. What it does:

• Replaces a damaged or missing door bin that won't hold items securely
• Restores organized storage on the refrigerator door for bottles and containers
• Secures to the door using factory mounting tabs to prevent shifting or falling
• Helps prevent spills and lost storage capacity caused by cracked bins

• Remove all items from the door shelf before installing the new basket.
• Align the basket's mounting tabs with the door slots, then press until it snaps into place; do not force broken tabs.
• Inspect door mounting points for damage; replace any broken clips or supports as needed.
• Wear gloves to protect hands from sharp edges and broken plastic during removal.

This Door basket is the replacement door insert that holds and secures items in the appliance door, restoring safe storage and proper closure. Designed to replace a cracked, broken, or missing door basket. What it does

• Provides a molded storage pocket inside the appliance door so small items stay in place.
• Restores proper alignment and fit of the door interior when the original basket is damaged.
• Helps prevent items from shifting, rattling, or falling out during use.
• Commonly replaced when the basket is cracked, warped, or detached from the door.

• One door basket.

• Disconnect power and follow the appliance service manual before beginning repair.
• Removal/installation may require removing the door trim or inner liner—support the door to prevent damage.
• Wear gloves to protect against sharp edges and handle plastic clips carefully to avoid breakage.

The Door Basket is an OEM replacment part for LG French door refrigerators. It is a removable, flexible storage basket mounted inside the refrigerator door panel. The basket provides easy access to commonly used ingredients directly from the door.

Causes of a failing basket can include cracked or broken mounting clips over time. 

Symptoms of an inadequate basket include:

• Inability to securely hold contents inside the fridge door 
• Detachment from fasteners allowing it to dangle
• Holes or damage reducing usable storage space

This OEM LG replacement basket is also compatible with some Kenmore models.

The Door Closing Cam is an OEM part for LG refrigerators. This part ensures the refrigerator door closes smoothly and securely. It helps guide the door into the correct position and ensures a tight seal, which is essential for maintaining the internal temperature and efficiency of the appliance.

Causes of a bad door closing cam can include wear and tear over time, damage from repeated use, or accidental impacts that can misalign or break the cam. 

Symptoms of a bad Door Closing Cam include:

• The door not closing properly or securely
• Difficulty in opening or closing the door
• Unusual noises when operating the door
• Misalignment of the door

This OEM LG part is also compatible with some Kenmore models.

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.