Parts for Kenmore 795.79022310 (79579022310, 795 79022310): Door Parts

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

This is a replacement door gasket assembly that restores the refrigerator door's airtight seal to help maintain proper temperatures and reduce energy loss. Use this OEM-style seal to replace torn, misshapen, or hardened door seals. What it does:

• Replaces the refrigerator door seal to help maintain a tight refrigeration seal
• Helps prevent warm air, moisture, and odors from entering the compartment
• Commonly used when the gasket is cracked, warped, or no longer rests flush
• Helps the appliance run more efficiently by reducing temperature fluctuations

• One door gasket assembly

• Disconnect power to the appliance before beginning any repair
• Gasket usually installs by tucking or fastening around the door flange; refer to your service manual for the exact procedure
• Inspect the door frame and mounting channel for damage or debris before installing the new gasket

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

A replacement pitcher guide that secures the water pitcher or pitcher-style container in the refrigerator door, helping keep the pitcher aligned and stable for smooth door operation and organized storage. What it does:

• Holds and aligns the refrigerator pitcher so it sits securely in the door bin.
• Reduces pitcher movement, rattling and tipping that can occur when opening or closing the door.
• Prevents the pitcher from shifting and potentially obstructing the door or other bins.

• Often snaps into the door bin or slides into a track; you may need to remove the bin or liner to access the guide.
• Use basic hand tools if required and avoid forcing parts to prevent damage.
• Follow the refrigerator service manual or OEM instructions for model-specific removal/installation steps.
• Disconnect power or follow safety guidance in the service manual when working near electrical components.

This door basket assembly replaces a cracked, broken or loose refrigerator door bin to restore secure storage for bottles, jars and small containers. Durable plastic construction mounts to the inner door shelf. What it does:

• Replaces a damaged or missing door bin that won't hold items securely
• Restores organized storage on the refrigerator door for bottles and containers
• Secures to the door using factory mounting tabs to prevent shifting or falling
• Helps prevent spills and lost storage capacity caused by cracked bins

• Remove all items from the door shelf before installing the new basket.
• Align the basket's mounting tabs with the door slots, then press until it snaps into place; do not force broken tabs.
• Inspect door mounting points for damage; replace any broken clips or supports as needed.
• Wear gloves to protect hands from sharp edges and broken plastic during removal.

This Door basket is the replacement door insert that holds and secures items in the appliance door, restoring safe storage and proper closure. Designed to replace a cracked, broken, or missing door basket. What it does

• Provides a molded storage pocket inside the appliance door so small items stay in place.
• Restores proper alignment and fit of the door interior when the original basket is damaged.
• Helps prevent items from shifting, rattling, or falling out during use.
• Commonly replaced when the basket is cracked, warped, or detached from the door.

• One door basket.

• Disconnect power and follow the appliance service manual before beginning repair.
• Removal/installation may require removing the door trim or inner liner—support the door to prevent damage.
• Wear gloves to protect against sharp edges and handle plastic clips carefully to avoid breakage.

The Door Basket is an OEM replacment part for LG French door refrigerators. It is a removable, flexible storage basket mounted inside the refrigerator door panel. The basket provides easy access to commonly used ingredients directly from the door.

Causes of a failing basket can include cracked or broken mounting clips over time. 

Symptoms of an inadequate basket include:

• Inability to securely hold contents inside the fridge door 
• Detachment from fasteners allowing it to dangle
• Holes or damage reducing usable storage space

This OEM LG replacement basket is also compatible with some Kenmore models.

The Door Closing Cam is an OEM part for LG refrigerators. This part ensures the refrigerator door closes smoothly and securely. It helps guide the door into the correct position and ensures a tight seal, which is essential for maintaining the internal temperature and efficiency of the appliance.

Causes of a bad door closing cam can include wear and tear over time, damage from repeated use, or accidental impacts that can misalign or break the cam. 

Symptoms of a bad Door Closing Cam include:

• The door not closing properly or securely
• Difficulty in opening or closing the door
• Unusual noises when operating the door
• Misalignment of the door

This OEM LG part is also compatible with some Kenmore models.

This snap-in hole plug button covers unused panel openings to restore a finished look and help keep out dust and moisture. A simple cosmetic trim piece that snaps into place and blends with the control panel. What it does:

• Covers exposed holes in control panels and consoles to improve appearance
• Helps block dust, lint and small debris from entering appliance openings
• Prevents accidental contact with internal components through unused holes
• Useful when replacing damaged buttons or finishing a repair

• One snap-in hole plug button

• Disconnect power to the appliance before working on the control panel
• Press the plug into the hole until it snaps flush; use a flat tool gently if needed
• Inspect fit and panel edge for damage; replace if cracked or loose to ensure a secure fit
• If panel removal is required, follow manufacturer instructions to avoid breaking clips

RAIL,SLIDE-LEFT

RAIL,SLIDE-RIGHT

This connector assembly links refrigerator components with a secure, factory-style connection. Replace a damaged or loose connector to restore reliable operation and prevent intermittent performance of the part(s) attached to it. What it does:

• Joins two factory leads/components with a secure locking interface
• Restores a stable connection so the attached component operates reliably
• Helps address intermittent operation, no response, or flickering due to worn or heat-damaged connectors
• Replaces connectors with broken locking tabs, loosened contacts, or visible melting/corrosion

• 1 connector assembly

• Disconnect power before servicing; if working near water lines, also shut off the water supply
• Note connector orientation and routing; take photos to aid reassembly
• Depress the locking tab to release; avoid pulling on wires
• Seat the new connector fully until it locks; route away from sharp edges and moving parts

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.