Parts for Kitchenaid YKMHS120EB3: 03 - Door Parts

This genuine replacement microwave door restores the oven's front panel and viewing window so you can safely use and monitor cooking. It replaces damaged, cracked or warped doors and helps ensure the door latch and seal function correctly. What it does:

• Replaces the oven's outer door and viewing window so the cavity is properly covered and visible.
• Restores a secure door latch and seal to help the microwave start and operate normally.
• Replaces cracked, dented or cosmetically damaged doors that can't close or latch reliably.
• Helps stop light leaks and reduces risk of sparks around a damaged door area.

• Disconnect power (unplug or shut off breaker) before starting any work.
• Handle glass and painted surfaces carefully to avoid damage; use gloves to protect hands.
• Align hinges and latch when reinstalling; do not force parts—verify the door closes and latches smoothly.

This outer door assembly replaces a damaged or worn microwave door to restore safe operation and proper cooking visibility. It provides the structural frame and viewing window needed for the microwave latch and seal to function correctly. What it does:

• Replaces a cracked, dented, or cosmetically damaged microwave door
• Restores proper door closure so the microwave can latch and operate
• Re-establishes the viewing window so you can monitor cooking progress
• Helps maintain the microwave's protective barrier and user safety

• Always disconnect power and verify the microwave is unplugged before starting repair
• Handle gently; align hinge pins and latch components during reassembly
• Basic hand tools are typically required; keep removed fasteners organized

This door handle is a direct-fit replacement designed to restore a secure grip and normal door operation. It replaces a damaged, cracked, or missing handle so the appliance door opens and closes reliably. What it does:

• Replaces broken, cracked, or missing door handle to restore everyday use
• Provides a solid grip for opening and closing the appliance door
• Helps prevent further damage from using a compromised handle
• Matches original mounting points for a proper, stable fit

• Removal/installation requires basic hand tools; keep fasteners for reuse unless new hardware is supplied
• Support the door while changing the handle to avoid damage or pinched fingers
• Wear gloves to protect hands from sharp edges and to avoid marking the finish

Color: White

Color: Black

Color: White

Color: Black

This outer door panel replaces a damaged or dented outer door on compatible Whirlpool appliances, restoring appearance and protecting the inner door components. It provides the exterior surface that you see and touch on the appliance door. What it does:

• Serves as the external surface of the appliance door and protects inner glass and components
• Restores a clean, undented exterior and improves appliance appearance
• Helps maintain the proper seal area and fit
• Commonly replaced when the outer door is bent, cracked, or cosmetically damaged

• Disconnect power (or unplug) and follow appliance-specific service manual before starting.
• Handle carefully to avoid scratching the finish or damaging inner glass and hardware.
• May require removing the door from the appliance and detaching inner panels, hinges, and/or trim—keep fasteners organized.

This outer door is the exterior cabinet panel that restores the appliance's finished appearance and protects internal door components from damage. Replaces a worn, dented, or corroded outer door panel to help the door look and function like new. What it does:

• Replaces damaged or dented exterior door panel to restore the appliance's appearance.
• Protects internal parts from moisture and impact.
• Helps maintain door alignment and sealing when used with intact inner components.
• Commonly used when the door shows visible cosmetic damage or exterior rusting.

• One outer door (single cabinet panel), as shown.

• High-level task: remove the inner liner and hinge fasteners to replace the outer panel; some models require disassembling door components.
• Use proper tools and support the door to prevent dropping or damage during removal.
• Disconnect power to the appliance before starting work if access requires electrical component removal.

This door latch is the replacement latching mechanism that secures the appliance door during operation, restoring proper door closure and safe operation. It fits the factory mounting and engages/disengages the door as designed. What it does:

• Secures the door closed so the appliance can run and maintain temperature or cycle safety systems
• Replaces a broken, worn, or loose latch that won't hold the door shut
• Commonly used when the door won't stay closed, won't latch, or the appliance won't start because the door is not detected as closed
• Engages with the door strike to ensure a positive, spring-loaded closure

• One door latch

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Access may require removing the oven/dryer front panel or door trim
• Align the latch with the mounting holes and secure with the original screws; test latch operation before fully reassembling
• If electrical connectors are present, ensure they are fully seated and undamaged

The Microwave Handle Spacer is an OEM component designed for Whirlpool brand countertop microwaves. This plastic spacer fits between the door handle and outer case to provide structure and proper spacing. 

Symptoms of a bad spacer include: 

• Loose or misaligned door handle  
• Excessive play or movement of the handle when opening/closing the door
• Noise or rattling coming from the door handle area
• Damage or wear visible on the spacer itself

Causes can be regular use over time breaking down the integrity of the spacer material, or impact injury compromising its form and function.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.