Parts for Lg LFCS22520S/00: Door Parts

This replacement screw secures panels and components on LG appliances to restore proper alignment and prevent rattling or loose parts. It's a direct-fit fastener used where OEM mounting hardware has become stripped, lost, or damaged. What it does:

• Secures panels, brackets, or trim to maintain appliance structure and alignment
• Helps stop vibration noise caused by loose panels or components
• Replaces missing or damaged mounting hardware to prevent parts from shifting
• Restores proper fit where stripped or worn screws no longer hold

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; excess torque can strip threads or crack plastic
• If working near electrical components, unplug the appliance first to ensure safety
• Keep removed screws organized during disassembly to match locations on reassembly

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This is a replacement freezer door that restores the exterior panel and helps maintain proper sealing and appearance of the freezer compartment. It's a direct-fit outer door intended to replace damaged, dented, or worn freezer doors. What it does:

• Replaces a damaged or dented freezer door panel to restore proper closure and appearance
• Helps maintain the door seal and consistent internal temperature when paired with a good gasket
• Stops drafts and reduces moisture buildup caused by warped or bent doors
• Restores normal door operation when hinges and mounting points are intact

• Doors can be heavy and awkward
• Inspect existing hinges, screws, and gasket before installation; replace any damaged hardware
• Disconnect power to the appliance and remove contents from the door area before starting work
• Follow OEM instructions for alignment and torque to ensure a proper seal and smooth operation

This door gasket assembly replaces a worn or damaged door seal to restore a tight, reliable seal and help prevent leaks, drafts, and loss of performance. Fits as the appliance's door seal where specified. What it does:

• Replaces the door seal to restore a watertight/airtight barrier and reduce leaks
• Helps maintain proper internal temperature and efficiency by preventing air loss
• Reduces odors and residue buildup that can result from a compromised seal
• Supports correct door closure and alignment for reliable operation

• One door gasket assembly

• Disconnect power and water before starting any repair
• Follow the OEM service manual for removal, alignment, and reinstallation steps
• Inspect mounting flange, clips, and sealing surface; replace damaged hardware if found
• Use appropriate tools and avoid sharp objects that could tear the gasket; consider having a second person assist with alignment

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

This door foam assembly replaces the insulation layer inside a refrigerator door to restore thermal sealing and reduce condensation. It helps maintain proper cabinet temperature and supports energy-efficient operation when the original foam is damaged or compressed. What it does:

• Replaces worn or damaged door insulation to improve temperature retention
• Helps reduce door sweating and moisture buildup that can lead to mold or odors
• Supports consistent cooling performance by restoring the door's insulating barrier
• Fits into the inner door cavity and works with existing door panels and liners

• One door foam assembly

• Recommended for repair by someone familiar with appliance disassembly; your model's service manual for exact steps
• Power off and empty the door before starting; remove shelves and hardware as needed to access the foam
• Avoid puncturing or compressing the foam during install; handle gently to preserve insulating properties
• If adhesive or clips are used, ensure proper alignment and secure fastening per OEM guidance

This door gasket assembly creates an airtight seal around the refrigerator door to help maintain proper temperature and energy efficiency. A worn or damaged gasket can cause cold air loss and inconsistent cooling. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and condensation inside the compartment
• Reduces compressor run-time by maintaining a stable internal temperature
• Commonly replaced when you notice air leaks, visible cracks, gaps, or persistent moisture at the door edge

• One door gasket assembly

• Disconnect power to the appliance before beginning any repair
• Remove the door trim or inner panel if required to access the gasket mounting channel
• Work around the perimeter to release the old gasket and seat the new gasket fully into the gasket channel for a uniform seal
• Inspect hinge and latch alignment after installation; adjust as needed to ensure proper door closure

This door gasket assembly replaces the flexible seal that creates an airtight closure around a refrigerator door, helping maintain proper cooling and reduce energy loss. Fits as the factory-style replacement for damaged, torn, or hardened seals. What it does:

• Seals the door edge to keep cold air in and warm air out, supporting consistent internal temperatures.
• Helps prevent frost buildup and excessive cycling that can result from a leaking door seal.
• Restores a firm, even seal when the original gasket is warped, cracked, or no longer flexible.

• One complete door gasket assembly.

• High-level replacement; usually requires removing the old gasket and pressing the new gasket into the door channel—keep hands clear of sharp edges.
• Check that the gasket is fully seated along the entire perimeter before testing; warm the gasket with a hair dryer briefly to help it conform if needed.
• Disconnect power or follow appliance safety procedures when working around electrical components.
• If the gasket attaches with screws or retainers, keep them and reinstall in the same locations; replace any damaged fasteners separately.

This door basket mounts to the refrigerator door to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, organized storage and prevent items from tipping or falling when the door opens.

• Provides storage space on the inside of the refrigerator door for small items and beverages
• Seats into the door liner rails to keep contents upright and accessible
• Restores proper fit when the original bin is cracked, warped, or missing
• Common symptoms: bin won't stay seated, falls off the door, or has broken plastic

• Remove all items from the old bin; lift the bin up and out of the door liner channels
• Align the new bin with the designated door channels at the desired height
• Lower into place and press gently to ensure both sides are fully seated
• Verify clearance and avoid overloading to prevent damage or improper seating

This replacement door basket snaps into the inner door to hold condiments, bottles, and small items. It restores secure storage when the original bin cracks or goes missing, keeping items organized and preventing the bin from falling off.

• Mounts on the interior door to store jars, bottles, and condiments
• Replaces a cracked, broken, warped, or missing door bin
• Helps resolve bins that wobble, fall off, or won't stay seated
• Restores designed storage capacity and organization

• Remove contents; lift the old bin straight up to release from the door liner.
• Align the new bin's tabs with the door slots and press down until it clicks securely.
• Install at room temperature to reduce risk of cracking; do not force.
• Unplug the appliance if working with interior components for an extended time.

The Door Basket Assembly is an OEM part for LG refrigerators. This assembly is designed to fit securely on the inner door panel, providing convenient storage space for frequently used items such as condiments, drinks, and snacks. 

Symptoms of a failing door basket assembly include:

• Cracks or damage that compromise the basket’s ability to hold items securely
• The basket becoming loose or detaching from the door
• Difficulty fitting the basket properly into its designated slots

Causes of door basket assembly issues generally stem from overloading the basket with too much weight, frequent and forceful use, or degradation of the attachment points due to age and usage.

This OEM LG part is also compatible with Sears/Kenmore models

This door stopper limits and cushions the appliance door's travel to prevent overextension and damage to hinges or surrounding surfaces. Replacing a worn or broken stopper restores smooth, controlled door movement and consistent closing alignment.

• Limits door opening angle and provides a positive stop to prevent overextension
• Helps protect hinges and adjacent panels from impact or scuffing
• Promotes smoother opening/closing and more consistent door alignment
• Symptoms of a failed stopper can include over-swing, scraping/rubbing, clicking noises, or a loose "stop" feel

• Disconnect power to the appliance before servicing
• Open the door to access the stopper; support the door if necessary
• Remove the fastener/retainer, note the old stopper's orientation, and install the new stopper using existing hardware
• Slowly open and close the door to verify the stop action and clearances after installation

The Door Closing Cam is an OEM part for LG refrigerators. This part ensures the refrigerator door closes smoothly and securely. It helps guide the door into the correct position and ensures a tight seal, which is essential for maintaining the internal temperature and efficiency of the appliance.

Causes of a bad door closing cam can include wear and tear over time, damage from repeated use, or accidental impacts that can misalign or break the cam. 

Symptoms of a bad Door Closing Cam include:

• The door not closing properly or securely
• Difficulty in opening or closing the door
• Unusual noises when operating the door
• Misalignment of the door

This OEM LG part is also compatible with some Kenmore models.

RAIL,SLIDE-LEFT

RAIL,SLIDE-RIGHT

This connector assembly links refrigerator components with a secure, factory-style connection. Replace a damaged or loose connector to restore reliable operation and prevent intermittent performance of the part(s) attached to it. What it does:

• Joins two factory leads/components with a secure locking interface
• Restores a stable connection so the attached component operates reliably
• Helps address intermittent operation, no response, or flickering due to worn or heat-damaged connectors
• Replaces connectors with broken locking tabs, loosened contacts, or visible melting/corrosion

• 1 connector assembly

• Disconnect power before servicing; if working near water lines, also shut off the water supply
• Note connector orientation and routing; take photos to aid reassembly
• Depress the locking tab to release; avoid pulling on wires
• Seat the new connector fully until it locks; route away from sharp edges and moving parts

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.