Parts for Lg LFX31945ST / 01: Door Parts

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, trim, and components. Secures loose or missing fasteners to reduce vibration and keep parts in place.

Secures and aligns refrigerator components to prevent shifting during use. Replace if bracket is cracked, broken, or missing to restore stable mounting.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.

Replaces damaged inner door insulation foam in refrigerator doors. Restores thermal performance when original foam is crushed, deteriorated, or missing.

Bracket holder assembly for your refrigerator. Secures internal components in place. Replace if cracked, broken, or missing to restore proper support.

Seals the Home Bar door-in-door panel to prevent warm air leaks, condensation, and temperature swings. Replace if cracked or loose. Confirm fit by model.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Front cover panel for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior covers. Restores appearance and protects components.

Refrigerator front cover assembly that installs on the exterior of your appliance. Replace if cracked, broken, or damaged to restore appearance.

Replacement door basket for refrigerator doors. Restores storage space for bottles and small items. Replaces cracked, broken, or missing door bins.

Chipped or cracked dispenser lever? This cover protects the mechanism and restores a clean pressing surface. Simple snap-on installation in minutes.

Refrigerator door basket mounts on the inner door liner to hold bottles and condiments. Replace if cracked, broken, or missing to restore storage.

Replacement door bin for refrigerators. Mounts inside the door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Secures and supports the bottom door pivot point. Replace when doors sag, rub, or fail to seal evenly. Restores proper alignment and smooth operation.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replacement refrigerator door handle assembly. Installs on refrigerator door. Needed when original handle is cracked, broken, or damaged.

Replace a cracked, broken, or damaged refrigerator door handle. Installs on the refrigerator door to provide a secure grip for opening and closing.

Replacement drawer slide rail for refrigerator freezer compartments. Restores smooth drawer gliding when original rail is cracked, broken, or worn out.

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Refrigerator handle bar component for bottom-mount models. Installs on the door to provide grip. Replace if cracked, broken, or missing.

Replace a cracked, broken, or missing handle bar on your bottom-mount refrigerator. This structural component installs on the door for grip and access.

Handle bar for bottom-mount refrigerators. Replaces damaged, cracked, or broken handle bars on door assemblies. Direct fit replacement part.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Replaces the top door pivot to restore proper alignment and smooth opening. Install when your refrigerator door sags or seals unevenly. Confirm fit with model.

Restores tension to your refrigerator door hinge for smooth operation. Replace this spring if your door sags, won't hold position, or shows wear.

Fix unresponsive or broken control panel buttons with this refrigerator button assembly. Restores reliable input and finished appearance to your control panel.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Refrigerator door handle assembly for models with decorative exterior finish. Replace if handle is cracked, broken, or buttons have fallen off.

Cosmetic cover panel for refrigerator home bar compartment. Replaces cracked, broken, or missing covers that affect appearance and door aesthetics.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Fix a refrigerator light that won't turn on when you open the door. This door switch activates interior lighting. Simple DIY repair part.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Button holder for refrigerator control panels. Secures and positions buttons in place. Replace if cracked, broken, or missing for proper button function.

Cushioning bumper that installs on refrigerator door hinge to prevent hard closing. Replace if cracked, worn, or missing to restore quiet operation.

Exterior trim piece that covers fasteners and exposed edges on your refrigerator door. Replace if cracked, broken, or missing to restore a finished look.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Fix no water dispensing or water leaking under the ice maker door with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker.

Fix no water dispensing or water leaking under the ice maker door with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.