Parts for Lg LMX30995ST/00: Door Parts

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, trim, and components. Secures loose or missing fasteners to reduce vibration and keep parts in place.

Secures and aligns refrigerator components to prevent shifting during use. Replace if bracket is cracked, broken, or missing to restore stable mounting.

Foam insulation assembly that installs inside the freezer door to improve energy efficiency. Replace if foam is compressed, damaged, or missing.

Foam insulation assembly that installs inside the freezer door to improve energy efficiency. Replace if foam is compressed, damaged, or missing.

Seals refrigerator door to prevent air leaks and temperature loss. Replace if you notice condensation, frost buildup, or warm spots. Confirm fit with your model number.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.

Replaces damaged inner door insulation foam in refrigerator doors. Restores thermal performance when original foam is crushed, deteriorated, or missing.

Bracket holder assembly for your refrigerator. Secures internal components in place. Replace if cracked, broken, or missing to restore proper support.

Seals the Home Bar door-in-door panel to prevent warm air leaks, condensation, and temperature swings. Replace if cracked or loose. Confirm fit by model.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Front cover panel for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior covers. Restores appearance and protects components.

Refrigerator front cover assembly that installs on the exterior of your appliance. Replace if cracked, broken, or damaged to restore appearance.

Replacement door basket for refrigerator doors. Restores storage space for bottles and small items. Replaces cracked, broken, or missing door bins.

Chipped or cracked dispenser lever? This cover protects the mechanism and restores a clean pressing surface. Simple snap-on installation in minutes.

Refrigerator door basket mounts on the inner door liner to hold bottles and condiments. Replace if cracked, broken, or missing to restore storage.

Storage bin that installs inside your refrigerator door for convenient access to frequently used items. Replace if cracked, broken, or missing.

Replacement door bin for refrigerators. Mounts inside the door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Secures and supports the bottom door pivot point. Replace when doors sag, rub, or fail to seal evenly. Restores proper alignment and smooth operation.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replacement refrigerator door handle assembly. Installs on refrigerator door. Needed when original handle is cracked, broken, or damaged.

Replace a cracked, broken, or damaged refrigerator door handle. Installs on the refrigerator door to provide a secure grip for opening and closing.

Connector assembly for bottom-mount refrigerators. Replaces broken, cracked, or missing connectors that join internal components or panels.

Connector assembly for bottom-mount refrigerators. Replaces broken, cracked, or missing connectors that join internal components or panels.

This slide rail is the replacement drawer track that lets a refrigerator or freezer drawer glide smoothly and stay aligned. It restores proper drawer movement for easier access and prevents sticking or uneven operation. What it does:

• Guides the refrigerator/freezer drawer along its intended path for smooth opening and closing
• Keeps the drawer aligned to prevent binding, jamming, or uneven movement
• Supports the drawer weight so it operates securely and consistently
• Helps restore normal access when worn or damaged tracks cause sticking or misalignment

• One slide rail

• Remove power and empty the drawer before attempting repair to avoid injury or damage
• Use basic hand tools; do not force components—inspect mating hardware for wear
• If screws or clips are missing or damaged, replace them with OEM equivalents

This ice maker drive gear replaces the small plastic gear that turns the ice-eject/auger mechanism so your ice maker can harvest and dispense cubes reliably. Fits compatible LG ice maker assemblies. What it does

• Transfers motor rotation to the ice-eject/auger mechanism so ice cubes are pushed out or advanced.
• Commonly replaced when cubes aren't being ejected, ice builds up, or the mechanism spins without moving the ejector.
• Works with the ice maker's actuator/motor to synchronize harvest and fill cycles.
• Small, precision-molded gear designed for quiet, consistent operation in the ice maker assembly.

• One ice maker drive gear.

• Disconnect power to the appliance before servicing to avoid shock or accidental motor operation.
• Remove the ice maker module and inspect surrounding gears/shaft for wear or debris before installing.
• Press the gear onto the motor shaft or replace the internal gear assembly as required; do not force or hammer into place.
• If other components show wear (motor, shaft, or companion gears), replace them to prevent repeat failure.

Replace a cracked, broken, or missing handle bar on your bottom-mount refrigerator. This structural component installs on the door for grip and access.

Handle bar for bottom-mount refrigerators. Replaces damaged, cracked, or broken handle bars on door assemblies. Direct fit replacement part.

Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Replaces the top door pivot to restore proper alignment and smooth opening. Install when your refrigerator door sags or seals unevenly. Confirm fit with model.

Restores tension to your refrigerator door hinge for smooth operation. Replace this spring if your door sags, won't hold position, or shows wear.

Fix unresponsive or broken control panel buttons with this refrigerator button assembly. Restores reliable input and finished appearance to your control panel.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Refrigerator door handle assembly for models with decorative exterior finish. Replace if handle is cracked, broken, or buttons have fallen off.

Cosmetic cover panel for refrigerator home bar compartment. Replaces cracked, broken, or missing covers that affect appearance and door aesthetics.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Fix a refrigerator light that won't turn on when you open the door. This door switch activates interior lighting. Simple DIY repair part.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Button holder for refrigerator control panels. Secures and positions buttons in place. Replace if cracked, broken, or missing for proper button function.

Cushioning bumper that installs on refrigerator door hinge to prevent hard closing. Replace if cracked, worn, or missing to restore quiet operation.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Replace your refrigerator's interior LED light assembly when lighting fails or dims. Restores bright illumination for clear visibility. Verify fit with your model.

Fix no water dispensing or water leaking under the ice maker door with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.