Parts for Frigidaire FCWM3027ABA: Doors Parts

This replacement latch assembly secures the refrigerator or freezer door to ensure proper closure and reliable operation. It restores the door catch so the appliance can maintain an effective seal and help prevent cooling loss. What it does:

• Secures the door to keep it closed and aligned
• Replaces a broken, bent, or worn latch that prevents proper latching
• Helps reduce warm air entry caused by a door that won't stay shut
• Works as the mechanical catch that engages the door striker

• Disconnect power (unplug appliance) before servicing to avoid shock or injury.
• Remove the inner door panel or access trim as needed to reach the latch; keep screws and fasteners organized.
• Align the latch with the door striker and tighten screws securely without over-torquing.
• Test door operation several times after installation to ensure proper engagement and seal.

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing and appearance. It arrives pre-assembled for a straightforward swap that gets your appliance closing and insulating normally. What it does:

• Replaces the outer door structure to restore proper sealing and temperature control
• Covers cosmetic damage like dents, scratches, or faded finish on the existing door
• Supports attached components (handle, trim, hinge areas) so they align and operate correctly
• Helps stop drafts and reduce energy loss when the door closes improperly

• Door assemblies are heavy and may require a helper
• Disconnect power and empty door contents before starting
• Keep mounting screws, hinges, and clips from the old door if not supplied;
• Use proper tools and follow OEM instructions for hinge alignment and seal seating to ensure a tight fit

This cabinet insulation is a factory-style replacement panel that restores the fridge/freezer cabinet's thermal barrier to help maintain proper cooling and reduce energy loss. Fits where original interior cabinet insulation was removed or damaged. What it does

• Replaces worn or damaged cabinet insulation to help keep cold air inside the compartment
• Reduces heat transfer that can cause longer run times and higher energy use
• Helps limit frost or ice buildup when the cabinet cavity is properly sealed
• Provides sound-dampening inside the cabinet area for quieter operation

• One (1) cabinet insulation panel as pictured

• Disconnect power to the appliance before beginning any repair
• Handle insulation with gloves and a dust mask; fibers may irritate skin and lungs
• May require removal of interior liners, shelves, or trim to access the cabinet cavity—retain all fasteners

This inner oven door glass restores the clear viewing window and helps contain heat inside the oven for even cooking. It replaces damaged or cracked inner glass so you can safely monitor food without opening the door. What it does:

• Forms the inner-facing glass layer in the oven door, keeping heat inside and protecting the oven cavity
• Allows safe, clear viewing of food while cooking without opening the door
• Replaces cracked, chipped, or clouded inner glass that can compromise visibility or safety
• Helps maintain the oven door's insulating integrity and consistent cooking temperatures

• One oven door inner glass panel as shown

• High-level: This part installs into the oven door assembly; door disassembly is typically required
• Safety-first: Disconnect power to the appliance before beginning work and allow the oven to cool completely
• Handle glass carefully to avoid breakage and wear cut-resistant gloves and eye protection

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

This replacement front panel restores the exterior trim around the appliance control area, protecting switches and electronics while renewing the unit's appearance. Designed to match OEM fit and finish for a clean, factory look. What it does:

• Covers and protects the control area from spills, dust, and impact
• Provides the correct mounting surface and openings for buttons and displays
• Helps restore cosmetic appearance when original panel is cracked, dented, or faded
• Secures with factory clip or screw locations to maintain proper alignment

• Always disconnect power to the appliance before starting any repair.
• Installation typically requires removing trim screws/clips and lifting the old panel out of position.
• Keep all fasteners and verify clip orientation to ensure a tight fit.

The Range Door Handle is an OEM component specifically designed for Frigidaire ranges. It provides a sturdy grip to safely open and close the oven door. 

Causes of a bad door handle can include wear and tear over extended use, exposure to high temperatures inside the oven, or accidental damage from impact. The cycling between hot and cool climates can compromise the integrity of the handle attachment points.

Symptoms of a bad door handle include:

• Difficulty grasping or turning the handle during use  
• The handle becoming loose, unstable, or detaching completely
• Difficulty safely opening and closing the range door
• Possible burns from inadvertent contact with the hot oven interior

This authentic OEM Frigidaire is compatible also with Electrolux, Gibson, Kelvinator, and Kenmore ranges. 

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

The Door Handle is an OEM replacement part for Frigidaire electric ranges. Located on the oven door, this metal handle grants access to the cooking cavity. This black door handle measures 34.88 x 6 x 3.63 inches

Causes of a bad door handle can include cracks or breaks at welded connection points due to repeated opening/closing over several years.

Symptoms of a bad door handle include:

• Difficulty lifting or releasing due to compromised integrity
• Handle detaching from the door posing a risk of falling or injury  
• Visible cracks or stress fractures in chrome plating

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.