Parts for Frigidaire FGET3066UFA: Doors Parts

This flat replacement glass shelf provides a stable, easy-to-clean surface inside the refrigerator to help organize and protect food. It restores proper shelving where the original glass was cracked, scratched, or missing. What it does:

• Replaces a flat refrigerator shelf glass to support food items and containers
• Restores even storage surfaces and prevents spills from soaking shelves below
• Helps maintain refrigerator interior organization and visibility of contents
• Fits into existing shelf supports or trim rails when the original glass is damaged or removed

• One flat replacement glass shelf

• Handle the glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any trim/shelf supports before swapping the glass
• Place the new glass into the existing rails or supports; do not force or bend components
• If any clips, rails or seals are damaged, replace them before use to ensure proper fit and safety

The Screw is an OEM replacement part for Frigidaire appliances. This screw is used to securely fasten components, such as panels, brackets, or internal parts, ensuring the appliance remains stable and functions correctly. Its precise design ensures a snug fit and reliable performance in the designated area of the appliance.

Over time, screws can become stripped, corroded, or loosened due to vibrations, frequent use, or environmental factors. A damaged or missing screw may lead to instability, misaligned components, or operational issues with the appliance.

Symptoms of a bad or missing screw include:

• Loose or misaligned panels or components
• Rattling or unusual noises during operation
• Difficulty in securing parts during repairs or adjustments
• Parts becoming detached or unstable

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Outer Door Assembly is an OEM part for Frigidaire ovens. It provides a protective barrier for the oven door while allowing you to view the cooking process without opening the door to prevent heat loss. It consists of a durable glass panel that is resistant to high temperatures and a sturdy frame that holds it securely in place.

A bad door assembly can be caused by accidental impacts, thermal stress, or wear and tear over time. Signs of a faulty panel assembly include cracks, shattered glass, or a loose-fitting frame.

Symptoms of a bad door assembly include:

• Cracked or shattered glass 
• A loose or misaligned frame 
• Impaired visibility of the cooking process

Replace your damaged or worn-out door assembly with this genuine OEM Frigidaire part to restore your oven door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Outer Door Assembly is an OEM replacement part for Frigidaire electric ranges. This outer stainless steel shell encases and protects the entire oven door. 

Causes for replacement typically include cosmetic wear over time like scratches, dents or discoloration that degrade the door's appearance.

Symptoms of a worn outer door include:

• Dull or fading exterior finish
• Visible dings, dents or scratches marring the door surface  
•  Scratched or clouded window glass  obscuring oven visibility

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore electric ranges. 

Restore a safe, finished oven door with this replacement outer glass panel. It replaces a cracked or shattered front window, protecting the door assembly and letting you see your food without exposing insulation or sharp edges. What it does:

• Forms the front/outer pane of the oven door window
• Protects door insulation and inner glass from damage
• Helps contain heat within the oven when intact
• Common symptoms: visible cracks, shattered or missing pane, loose or rattling glass

• 1 outer oven door glass panel

• Disconnect power and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; glass edges can be sharp
• Removing the door from the hinges makes service easier; support the door to prevent damage
• Transfer any trim/brackets/nameplate from the old pane and reuse existing hardware as required

This metal door hinge replaces a worn or damaged refrigerator door pivot to restore smooth opening and proper door alignment. It helps keep the door secure and prevents sagging, rubbing, or uneven sealing. What it does:

• Provides a stable pivot point so the refrigerator door opens and closes correctly
• Restores proper door alignment to improve sealing and cooling performance
• Stops door sagging or rubbing on the cabinet edge
• Reduces noise from a loose or worn hinge

• One hinge

• Unplug the appliance and remove food/obstructions from the door area before starting
• Support the door while removing and installing the hinge to prevent drops or damage
• Reuse original fasteners unless replacements are specified by the manufacturer
• If the door has glass or heavy components, get a second person to help for safety

This small mounting spacer positions and supports components inside the appliance to ensure correct clearances and alignment. It helps keep panels and assemblies spaced properly for reliable operation and noise reduction. What it does:

• Creates and maintains the correct gap between panels or internal components
• Prevents rubbing, vibration, and misalignment that can cause noise or wear
• Helps secure assemblies for proper airflow and operation
• Used where a fixed, non-adjustable separation is required

• One spacer

• Install in the location shown in the appliance parts diagram; fasten with the original screw or clip
• Replace any damaged or worn spacers to restore proper component alignment
• Power off and disconnect the appliance before accessing internal panels

The Handle is an OEM part for Frigidaire ranges. Crafted from durable heat-resistant metal, these handles provide safe, ergonomic access to oven interiors during cooking cycles.  

Prolonged exposure to elevated oven temperatures causes typical discoloration of painted finishes as well as looseness from load stresses reducing tactile control over years. Cooking convenience decreases without gripable surfaces.

Symptoms indicating handle wear include:

• Faded, chipped, or flaking handle finishes  
• Loose, rattling, or awkward movement from placement
• Deteriorating mounting attachments risking accidental falls

Replacing with this OEM Frigidaire handle restores tactile guidance into the cooking cavity. Compatibility also fits some Kenmore, Electrolux, and Gibson ranges renewing secure doorknob function through authorized maintenance. 

A small metal mounting bracket that secures and supports appliance components and panels for proper alignment and stability. Replaces a damaged or missing bracket to reduce movement and restore fit. What it does:

• Secures panels, trim, or internal components to the cabinet or frame
• Restores proper alignment
• Reduces rattling or vibration caused by a loose support
• Prevents further wear on adjoining parts by holding components steady

• One mounting bracket

• Disconnect power and/or water before beginning any repair
• Inspect adjacent fasteners and attachment points for damage; replace if needed
• Use appropriate screwdriver or socket; do not overtighten fasteners

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.