Parts for Ge GPS12FGHBSB: Doors & Shelves Parts

This fixed freezer shelf provides a stable storage surface inside the freezer compartment, helping keep frozen items organized and preventing items from shifting or blocking airflow. Direct replacement for a worn, damaged, or missing shelf. What it does:

• Supports frozen food containers and packages so items stay organized and accessible
• Restores proper shelving after cracks, chips, or sagging that let items fall through
• Helps keep airflow clear by providing the intended shelf plane in the freezer
• Safe, direct-fit shelf when the original shelf is broken or missing

• Unplug the appliance or disconnect power before removing or installing the shelf.
• Remove food and any loose items from the shelf area before starting.
• Support the shelf while disengaging clips or rails to avoid dropping or damage.
• Refer to the refrigerator's owner manual for exact removal steps.

This reversible door hinge plug covers and protects the refrigerator door hinge for a finished look and to keep dirt and moisture out. It restores the hinge appearance and helps prevent debris buildup that can affect hinge movement. What it does:

• Snaps into the hinge opening to cover exposed hardware and mating surfaces
• Helps keep dust, grease, and moisture from collecting in the hinge area
• Restores a clean, finished appearance to the door edge
• Can reduce noise or rubbing caused by debris trapped at the hinge

• One reversible door hinge plug (plastic)

• Designed for simple push-in installation; align and press until it snaps into place
• No special tools typically required; use a soft cloth to protect surrounding surfaces
• Inspect hinge and mounting hardware for wear or damage before installing
• If the plug is brittle or damaged, replace to maintain protection and fit

This door stopper is a small rubber bumper that cushions and limits door travel to prevent impact damage and reduce noise. It restores proper door alignment and quiets slamming on compatible appliances. What it does:

• Absorbs impact when the door reaches its stop to prevent chipping or dents.
• Helps maintain correct door position and seal by limiting over-travel.
• Reduces vibration and noise from closing or banging doors.
• Commonly used where a soft, durable bumper is required on appliance doors.

• Inspect the mounting area and remove debris before installing the bumper.
• Press or slide the stopper into its locator until fully seated; some models may require a light tap.
• If fasteners are present on your model, secure with the original screw(s); do not overtighten.
• Disconnect power and follow the appliance manufacturer's safety instructions before working near electrical components.

The Fixed Door Shelf is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door shelf can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door shelf include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This refrigerator vegetable pan is the crisper drawer that holds fruits and vegetables in the fresh food compartment. Replace a cracked or missing bin to restore smooth operation and proper storage capacity.

• Stores produce in the crisper area of the refrigerator
• Slides on the shelf rails for easy access
• Replaces bins that are cracked, chipped, or have broken tabs
• Helps resolve sticking or misalignment caused by a deformed drawer

• Disconnect power before servicing interior parts
• Open doors fully and remove any items or obstructing bins
• Slide the old drawer out; align and slide the new drawer onto the correct rails until fully seated
• Check for smooth travel and proper fit before loading produce

This vegetable pan cover assembly replaces a cracked, warped or missing crisper cover to help keep produce contained and separated in the refrigerator. It restores the cover that sits over the vegetable/fruit drawer for normal use and appearance. What it does:

• Covers and protects the refrigerator vegetable/crisper pan, helping contain produce and spills.
• Helps maintain separation between crisper drawer and shelf space.
• Stops rattling or shifting caused by a broken or loose cover.
• Useful when the original cover is cracked, chipped, warped or missing.

• One vegetable pan cover assembly only.

• Remove stored food from the crisper area before installing.
• Typically snaps or slides into place; no special tools usually required. Inspect existing mounting points for damage.
• Handle carefully to avoid scratching or cracking the part during installation.

This replacement condiment shelf restores organized storage on the refrigerator door so bottles, jars and small containers sit securely. Simple direct-replacement shelf that reattaches to the existing door rails for reliable everyday use. What it does:

• Provides a dedicated shelf on the refrigerator door for condiments, sauces and small containers.
• Holds items upright and helps reduce shifting or falling during normal door use.
• Replaces cracked, chipped or missing door shelves that no longer secure items.
• Matches OEM door-rail attachment style for a straightforward swap with the original shelf.

• Remove all items from the door before starting and work with the door supported.
• Inspect door rails and mounting grooves for damage; replace damaged clips or hardware as needed.
• Lift the old shelf out of the rails (or unclip, depending on style) and seat the new shelf into the door rails until it engages; do not force.

A replacement center hinge bushing that supports smooth door pivoting and helps keep refrigerator/freezer doors aligned. Restores proper door swing and reduces rubbing or uneven gaps for a better seal and operation. What it does:

• Guides the center hinge pin so the door opens and closes smoothly
• Helps maintain proper door alignment to prevent rubbing or sagging
• Reduces wear on the hinge pin and surrounding hinge surfaces
• Can help improve door sealing when misalignment is causing gaps

• One center hinge bushing

• Intended for the center/top door hinge; refer to your service manual for correct hinge orientation
• Remove power or follow appliance-specific safety steps before disassembling door/hinge
• Inspect hinge pin and surrounding parts for wear; replace damaged components as needed
• Use basic hand tools; do not force parts—replace per OEM guidance