Parts for Poulan GC2126C: Driveshaft / Handle / Shield Parts

This part is a replacement throttle cable assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or malfunctioning throttle cable assembly in a variety of line trimmer models. This throttle cable assembly is a critical component that controls the speed of the engine. If this part is broken, stretched, snapped, or otherwise defective, the line trimmer may not be sufficiently controllable by the user. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle cable assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this throttle cable assembly is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This replacement part is a spring trigger and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This specific part is commonly found in trimmers or edgers. This spring helps create torque and assists the other parts of the appliance to run smoothly and efficiently. A new spring trigger might be needed if the current one is damaged or broken in any way such as being stripped or snapped due to normal wear and tear. If the user notices parts that are no longer working together, it could be because the spring is faulty. It is not unusual for this part to become damaged due to the nature of the spring. Be sure to reference the proper owner's manual before beginning this repair. This spring trigger is sold individually and is sourced directly from the manufacturer to ensure a proper fit. This is also and OEM replacement part.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a gearbox assembly that is intended for use with trimmers and brush cutters. A gearbox assembly is a device that transfers power from one component to another. It increases torque while reducing speed. This gearbox assembly is manufactured out of a high-quality metal material.A new gearbox may be needed if the unit is making any strange grinding noises, if there is a burning smell, if the trimmer spins erratically, or if it does not spin at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This gearbox assembly is a genuine OEM Husqvarna part. It is sold individually. This particular gearbox assembly is compatible with trimmers and brushcutters that are manufactured by Husqvarna, Craftsman, and Poulan.