Parts for Husqvarna 128DJ: Driveshaft / Handle / Shield Parts

This cable wire harness assembly is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. A cable wire harness assembly is designed for use with edgers, trimmers, or string trimmers. It is compatible with products from brands such as Husqvarna and Poulan.The cable wire harness assembly is a complete part assembly, and it includes both the throttle cable and the control wires. This item is used to run the motor as well as to adjust the engines out by linking the control handles. The replacement or repair process of the cable wire harness assembly is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This replacement part is a throttle and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This throttle is typically found in grass trimmers and is what makes the appliance start and stop. The throttle allows the user to control the engine of the machine so that they stay safe during use. A new throttle might be needed if the user is unable to start or stop the machine, or if the appliance is stopping abruptly during use. It is not unusual for this part to be worn down with normal use over time. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This replacement part is a spring trigger and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This specific part is commonly found in trimmers or edgers. This spring helps create torque and assists the other parts of the appliance to run smoothly and efficiently. A new spring trigger might be needed if the current one is damaged or broken in any way such as being stripped or snapped due to normal wear and tear. If the user notices parts that are no longer working together, it could be because the spring is faulty. It is not unusual for this part to become damaged due to the nature of the spring. Be sure to reference the proper owner's manual before beginning this repair. This spring trigger is sold individually and is sourced directly from the manufacturer to ensure a proper fit. This is also and OEM replacement part.

This part is a replacement trigger. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken trigger in trimmers and edgers.The trigger features the throttle mechanism and is essential for the user to properly control the equipment. If the current trigger is jammed or in any way broken, it should be immediately replaced. Be careful when disassembling the handle to ensure no small springs are lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular trigger, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This trigger can be used with a variety of trimmer and edger models manufactured by Husqvarna, Poulan, and other brands.

The Left Hand Housing Throttle is an OEM part for Husqvarna power equipment, specifically designed to encase and protect the throttle mechanism. This housing component is crucial for the proper function and safety of equipment such as chainsaws, trimmers, and blowers, ensuring that the throttle operates smoothly and is well-protected from external elements and debris.

Symptoms of a bad Left Hand Housing Throttle include:

• Difficulty in engaging or controlling the throttle
• Visible cracks or damage to the housing
• Loose or unresponsive throttle action

Causes of a bad housing throttle can stem from accidental drops or impacts during use, exposure to harsh environmental conditions that degrade the material, or general wear and tear from regular use.

Replacing a damaged or malfunctioning throttle housing is essential for maintaining the effectiveness and safety of your Husqvarna equipment, ensuring that all controls remain responsive and protected.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This part is a replacement driveshaft coupler. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective driveshaft coupler in a variety of line trimmer models.The driveshaft coupler connects the lower driveshaft to the upper driveshaft. This part may become worn or broken over time and will need to be replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this driveshaft coupler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this driveshaft coupler is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a gearbox assembly that is intended for use with trimmers and brush cutters. A gearbox assembly is a device that transfers power from one component to another. It increases torque while reducing speed. This gearbox assembly is manufactured out of a high-quality metal material.A new gearbox may be needed if the unit is making any strange grinding noises, if there is a burning smell, if the trimmer spins erratically, or if it does not spin at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This gearbox assembly is a genuine OEM Husqvarna part. It is sold individually. This particular gearbox assembly is compatible with trimmers and brushcutters that are manufactured by Husqvarna, Craftsman, and Poulan.

This trimmer head holds the line that is used to trim foliage and hedges in the yard. The trimmer head is made of durable plastic and helps control how much line is being used when the equipment is running. It can become damaged during use and will need to be replaced.Wear and tear can happen with a trimmer head. It's also possible to bang the head into something else and notice that it has become damaged or broken. If any of these situations occur, replacing the head is the only option. A flathead screwdriver can be used to loosen the head so it can be removed. Take the old head off of the nut on the bottom of the shaft to loosen it. Afterward, place the new trimmer head onto the shaft and tighten it before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The trimmer head is sold individually. It is made to be used with string trimmers manufactured by Poulan and Husqvarna.