Parts for Frigidaire 95-1522: Electrical Equipment Page 2 Parts

Color: White

The Freezer Door Gasket is an OEM part for Frigidaire refrigerators. This gasket creates a seal around the freezer door to prevent warm air from entering and cold air from escaping, ensuring the freezer maintains its optimal temperature.

Causes of a bad freezer door gasket can include wear and tear over time, exposure to harsh cleaning chemicals that degrade the material, or physical damage from frequent use or mishandling.

Symptoms of a bad freezer door gasket include:

• Noticeable gaps or cracks in the gasket
• Frost buildup inside the freezer
• Increased energy consumption
• The freezer door not closing properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Gasket is an OEM replacement part for Frigidaire models. It provides a sealing barrier around the door frame, preserving cool air inside the refrigerator compartment. Composed of durable synthetic materials, the contoured gasket creates an insulating shield.

Causes of a faulty gasket include cracks or breaks from over-closure of the refrigerator door. Deterioration from extended exposure to temperature extremes can also impact integrity over time.

Symptoms of a bad refrigerator gasket include: 

• Inability to maintain a consistent internal cooling temperature
• Accumulation of moisture or frost at door edges  
• Visible gaps allowing warm external air to infiltrate
• Air leaks around the refrigerator opening

Compatible models include brands produced by Electrolux, Gibson, and Kelvinator.

This part has been discontinued and is no longer available.

Replacement part may be longer than needed, per the manufacturer it will have to be cut to fit.

Color: white. Measures about 2 inches high by 1-1/2 inches deep.

The Right Hand Door Shelf Support is an OEM part for Frigidaire refrigerators. This support bracket holds the door shelf in place, providing stability and ensuring that items stored in the door compartment remain secure.

Causes of a bad door shelf support can include wear and tear from regular use, physical damage from overloading the shelf, or breakage due to impact when opening or closing the door. Over time, the plastic material can also become brittle and crack.

Symptoms of a bad door shelf support include:

• Door shelf sagging or detaching from the door
• Difficulty in securing items on the shelf
• Visible cracks or damage to the support bracket
• Items falling out when opening the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part supports the door shelf, providing a sturdy base to hold various items such as bottles, jars, and condiments securely in place on the refrigerator door.

Common causes of a bad door shelf support include regular wear and tear, overloading the shelf with heavy items, or accidental damage. 

Symptoms of a bad door shelf support include:

• The door shelf sagging or tilting
• Items falling off the shelf
• The shelf not staying securely in place
• Visible cracks or breakage in the support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door support bracket replaces a worn or damaged support that helps hold and align the appliance door. Restores proper door fit and reduces sagging so the door seals and operates more reliably. What it does:

• Provides stable support for the appliance door to prevent sagging and misalignment
• Helps maintain proper door gap so the door closes and seals correctly
• Replaces broken, bent, or worn support brackets that can cause uneven operation
• Reduces rattling or extra movement caused by a compromised support

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; follow manufacturer instructions for access and removal
• Handle sharp edges carefully and support the door during removal/installation to avoid damage or injury

Left side door shelf support. Color: White. Measures about 1 3/4 inch x 1 3/4 inch. For the right hand side order 3206150.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part holds and secures the door shelf in place, providing support for the items stored on the shelf. 

Causes of a bad door shelf support can include regular wear and tear, overloading the shelves, or physical damage from impacts. 

Symptoms of a bad door shelf support include:

• Shelves not staying in place or becoming loose
• Cracks or breaks in the support material
• Difficulty in securing the shelf to the door
• The shelf tilting or falling off the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part has been discontinued and is no longer available.

Replacement part may be longer than needed, per the manufacturer it will have to be cut to fit.

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

Color: White

This replacement freezer door handle restores a secure grip and original look to your appliance. Designed to match the factory finish, it replaces a cracked, loose, or worn handle so the freezer door opens and closes reliably. What it does:

• Provides a sturdy grip for opening and closing the freezer door
• Replaces handles that are cracked, broken, loose, or cosmetically damaged
• Restores factory appearance in almond finish
• Helps prevent injury from sharp broken edges or sudden handle failure

• Intended to be installed using the existing mounting hardware unless otherwise specified by the manufacturer
• Turn off power to the appliance and remove food from the work area when required for safe access
• Use basic hand tools and avoid overtightening fasteners to prevent damage
• If mounting hardware or brackets are missing/damaged, replace with correct parts before installation