Parts for Husqvarna YT48CS-96043022400: Engine Parts

This part is a clutch that is used on lawn tractors. A clutch transfers the power from the engine to the drivetrain and is responsible for engaging the blade.A new clutch may be needed if the lawn tractor will start up but then stalls. If the clutch is sticky or if it operates hard, it may be a good time to replace the clutch. If the engine is revving higher than usual or if there are strange noises coming from the clutch, it is likely that the clutch could be going bad. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clutch is a genuine Husqvarna part. It is sold individually. This particular clutch is compatible with lawn tractors that are manufactured by Husqvarna, Jonsered, Craftsman, and Murray.

This replacement part is a fuel cap assembly. This is a genuine replacement part made by Husqvarna. Fuel caps are commonly found in machines that require fuel to run. The engine then uses the fuel to operate effectively. The tank is what holds the fuel so that it can be accessed during use, and the fuel cap ensures that the substance stays inside the tank and does not escape during use.A new fuel cap assembly might be needed if the current one is damaged or leaking the fuel. If this is the case, replace the cap immediately as leaking fuel is a serious safety hazard. It is recommended that work gloves be worn as there can still be fuel leftover in the tank during the repair. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This is a lawn tractor fuel line that will work with tractors from a range of manufacturers. The fuel line is used to carry fuel from the tank to the engine carburetor. This will ensure that the tractor can start and run properly. If there is a problem with the fuel line, owners might notice that there are leaks or that they have trouble getting the lawn tractor started.The fuel line is durable, but it could need to be replaced eventually. The material can start to wear down over time, and it might develop cracks. It could also be damaged during the operation of the tractor in some cases. Always wear gloves and work in a well-ventilated area.This lawn tractor fuel line can be used for models of tractors from Husqvarna, Dixon, Poulan, Craftsmen, Ariens, and Southern States. The piece is sold individually. It is a genuine OEM replacement part that was sourced directly from the manufacturer.

This is a replacement exhaust pipe. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached exhaust pipe on a variety of different lawnmower models. The exhaust pipe is necessary for properly expelling exhaust fumes from the lawnmower's engine. Exhaust pipes can easily become bent, dented, or otherwise damaged from being hit on hard objects or the ground during use. If this occurs, this part will need replaced. Access to proper tools is required for replacing this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install exhaust pipe, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this exhaust pipe is suitable for use on several different lawnmower models manufactured by Husqvarna and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.