Parts for Poulan PXT195G42 (96046002200): Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This engine pulley is a genuine MTD part, sold individually. This engine pulley can be used as a replacement part in a lawnmower. The purpose of the engine pulley in a lawnmower is to guide the rotational motion of the drive belt within the internal mechanisms of the lawnmower such that the belt can facilitate the rotation of the wheels and the propulsion of the appliance across a variety of surfaces when in use.If the engine pulley has been cracked, scraped, punctured, dented, warped, or eroded to the point that it can no longer serve its function, the engine pulley should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This engine pulley is compatible with the following outdoor appliance brands: MTD and Craftsman.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This is a lawn tractor fuel line that will work with tractors from a range of manufacturers. The fuel line is used to carry fuel from the tank to the engine carburetor. This will ensure that the tractor can start and run properly. If there is a problem with the fuel line, owners might notice that there are leaks or that they have trouble getting the lawn tractor started.The fuel line is durable, but it could need to be replaced eventually. The material can start to wear down over time, and it might develop cracks. It could also be damaged during the operation of the tractor in some cases. Always wear gloves and work in a well-ventilated area.This lawn tractor fuel line can be used for models of tractors from Husqvarna, Dixon, Poulan, Craftsmen, Ariens, and Southern States. The piece is sold individually. It is a genuine OEM replacement part that was sourced directly from the manufacturer.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.