Search Results

Replacing old filters Read more

• No heat or not enough heat

The root cause was the front glides. They were virtually gone, and the drum was on metal to metal. So I replaced them with a front glide kit. I also replaced the belt, rear rollers, and lint screen. I am happy to say all the parts fit perfectly, and I couldn't find a better price anywhere else. I will definitely keep you on file for the next time I need appliance parts! Thank you! Sincerely, pw Read more

Replaced all filters Read more

After looking at many different stores for a replacement part, finally looked on GE website - the part was rediculous - then found AppliancePartsPros.com & saved $20.00 on the part! It took a considerable amount of time to locate the part but once I discovered APP.com, took seconds to order & seconds to replace - very pleased! Read more

My dryer lint filter was clogged beyond regular cleaning due to its age. After 15 years of daily use it was time to replace. In.the process of determining why the dryer was taking so long to dry loads, I noticed the filter housing gasket had torn off somehow which allow a lot of lint to pass through into the dryers main housing. I believe this prevented the dryer to have good air flow. Replacing both the filter and its housing was easy and fixed the problem pronto! I saved myself $1000 by... Read more

Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more

Well, I gotta say I was happy to find you still had parts for almost 20 year old microwaves. The microwave itself worked fine, so I hated to have to buy a new one, but I just couldn't take being hit in the head anymore; and my fix of using string and wire to tie it to the surrounding cabinets was unsightly to say the least. I'm glad I did some research and found this part - all I had to do was pop it in place and now the vent grill is secure. Problem solved with minimal cost. Read more

I simply ordered a new vent online with Appliance Pros.com and received the new part within a few days. Read more

The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in". Read more

I pulled the dryer away from the wall and unplugged it. Then I used a 5/16 nut driver and removed the 2 screws in the bottom front panel and pulled it off. Next I removed the 2 5/16 screws holding the front door panel and pulled it down far enough to disconnect the wires for the light and the wires on the door switch. Then , using a putty knife I popped the springs holding the top and control panel then pulling the top up and resting it against the wall. Now I started my repair by laying on... Read more

Based on internet search and data found on APPLIANCE PARTS PRO, I deduced that the "infinite control " module was most likely bad. Replaced it and all is good. Toughest part was remembering how to disengage cooktop from down draft blower and then pulling the cook top up in within it's opening. Once pulled up, I put short 2x4's across the opening corners to support the cooktop safely while I worked on it. Next issue was figuring out exactly which screws held the glass top in place. As... Read more

I got it in the mail, I opened it, I handed it to my wife....and she installed it. Easy-Peasy! (Being retired is a blast) Read more

The refrigerator is about 8-9 years old. GE Profile side by side with water and ice dispenser in the freezer door. Recently, it was time to replace the MSWF cartridge (the indicator light came on). I've done this numerous times over the years, but on this occasion, after installing the new cartridge, I noticed a significant drop in the water pressure and quantity coming out of the dispenser. The ice maker did not seem to be affected, but the water dispenser was definitely a slow trickle. I... Read more

Replaced filter housing ,flushed water lines. Read more

I was cleaning the supply hose filter screen constancely, I had no Idea there was filter screens in the pump intakes on the machine. once I found them and replaced them, I had plenty of water, so don't buy supply hoses with the screens in them until you check to see if your machine has them already. Read more