Parts for Lg LSC27918SW: Freezer Door Part Parts

The Water Filter is an OEM part for LG refrigerators. It is a component that ensures the purity and quality of your drinking water and ice.

The water filter is designed to effectively reduce contaminants, impurities, and odors from your water supply, providing you with clean and refreshing drinking water. It employs advanced filtration technology to remove substances such as chlorine, sediment, and other potentially harmful particles.

Causes of a faulty water filter can include regular usage over time, expiration of its filtering capacity, or clogging due to sediment buildup. These factors can result in compromised water quality, decreased flow rate, or unpleasant taste and odor.

Symptoms of a bad water filter may include:

• Decreased water flow from the dispenser
• Water with an unusual taste or odor
• Visible discoloration or particles in the water

This OEM LG part can also be used on Kenmore/Sears appliances. 

This Ice Bucket Cover keeps ice protected and helps guide ice into the dispenser area, reducing spills and contamination. It installs on the refrigerator's ice bucket to maintain clean, contained ice storage and proper dispenser operation. What it does:

• Covers and protects stored ice from contaminants and odors
• Guides ice toward the dispenser chute for consistent delivery
• Helps prevent ice from spilling when removing the bucket
• Restores the original fit and function when the previous cover is damaged or cracked

• One ice bucket cover

• Typically snaps into place on the top of the ice bucket; handle gently to avoid cracking
• Remove the ice bucket and clear any ice before installing the cover
• No special tools usually required; follow safety precautions—disconnect power to the appliance if you must reach into the ice maker assembly

This ice bucket assembly stores the ice made by your refrigerator and delivers it to the dispenser. Replacing a cracked or worn bin restores dependable storage and smooth dispensing, reducing jams and spills at the door.

• Collects and holds ice from the icemaker
• Guides and feeds ice toward the dispenser when activated
• Aligns with the drive mechanism for smooth dispensing
• Common symptoms: ice not dispensing or dispensing inconsistently, dispenser jams, visible cracks or broken tabs on the bin

• Disconnect power before servicing
• Remove the old bin; empty any remaining ice and press any release latch if present
• Seat the new bucket fully so the rear drive coupler engages; do not force
• Restore power and allow the icemaker to cycle fresh ice before testing dispense

A replacement refrigerator door gasket that restores a tight seal to help maintain proper temperature and efficiency. Replaces a worn or torn seal to reduce air leaks and help prevent frost and moisture build-up. What it does:

• Seals the door to keep cold air in and warm air out, helping the appliance maintain set temperatures
• Helps reduce frost, condensation, and moisture on the inner liner
• Can improve cooling performance and reduce excessive run time caused by leaks
• Addresses symptoms like visible gaps, tears, warped edges, or persistent condensation at the door

• One refrigerator door gasket

• Disconnect power to the appliance before replacing the gasket to avoid electrical risk
• Remove the old gasket carefully and seat the new gasket fully into the door channel; some trim or fasteners may need to be loosened
• Check door alignment and closing after install; ensure the gasket compresses evenly around the door perimeter
• Wear gloves to protect hands and avoid damaging the new gasket while handling

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Door Stopper Assembly is an OEM component specifically designed for LG refrigerators. It secures the fridge door in fully closed and aligned positions. 

The stopper assembly utilizes a pneumatic cylinder and integrated mounts to softly cushion door movement. This allows for smooth closing with an audible click to confirm proper sealing.

Causes of a bad stopper assembly can include cracked or leaking air cylinders after years of use. Loose or sheared mounting hardware may also cause improper alignment and restricted closure.

Symptoms of a bad door stopper assembly include: 

• Gaps forming around the door seal when closed
• Doors difficult to latch fully or align correctly  
• Premature cooling loss from unsealed openings

Replacing this LG part restores a snug, confirmed door shut. The OEM stopper components ensure dependable closing effort for efficient operation. This replacement is compatible with some Kenmore models as well.

The Ice Maker Assembly is an OEM part for LG refrigerators. This assembly is a key component in the refrigerator's ability to produce ice efficiently and reliably. 

Causes of damage to the Ice Maker Assembly often involve wear and tear from normal use, water supply issues like hard water causing scale buildup in the mechanism, or electrical failures that affect the assembly's control components.

Symptoms of a bad Ice Maker Assembly include:

• Failure to produce ice, indicating that the assembly may not be receiving water, freezing the water properly, or ejecting ice.
• Ice production is significantly slower than usual, or the ice cubes are smaller than normal
• Strange noises during ice-making cycles, such as clicking or whirring sounds

This OEM LG part is also compatible with some Kenmore models.

Changes between cubed or crushed ice.