Parts for Ge GYE18JMLGFES: Freezer Door Parts

The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.

You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in water and ice
• Cloudy or discolored water
• The filter indicator light on the refrigerator signaling a replacement

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Drawer Gasket is an OEM part for GE refrigerators. This part is responsible for creating an airtight seal between the freezer door and the freezer compartment, preventing cold air from escaping the freezer, while also preventing warm air from entering. It helps maintain consistent temperatures inside the freezer, keeping your frozen foods fresh and preserved for longer.

A bad freezer drawer gasket can occur due to wear and tear, damage, or other factors. If you notice symptoms such as frost buildup, excessive condensation, or a decrease in freezer efficiency, it may be time to replace the gasket.

Symptoms of a bad freezer drawer gasket include:

• Frost buildup inside the freezer
• Excessive condensation on the gasket or freezer walls
• Decreased freezer efficiency

Restore your refrigerator's freezer drawer by replacing the faulty gasket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This replacement screw secures appliance brackets, panels, and components. It restores a tight, aligned fit when the original hardware is stripped, rusted, or missing, helping reduce vibration and rattling for reliable operation.

• Fastens brackets, panels, or mounts to keep components secure and aligned
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, or loose/misaligned parts
• Matches original spec for reliable hold and fit

• Disconnect power before servicing; use proper PPE
• Match thread and length to the removed screw before installation
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Ensure parts are aligned and seating surfaces are clean before tightening

This right-side freezer door bracket secures and positions the freezer door hinge so the door opens and closes smoothly and stays aligned. It helps restore proper door fit and prevents sagging or uneven gaps. What it does:

• Supports the freezer door hinge assembly and holds the door in correct alignment
• Helps stop door sagging and reduces rubbing or binding when opening/closing
• Restores a tight door fit to help maintain proper seal and cooling performance
• Can address symptoms like a misaligned, loose, or drooping freezer door

• One right freezer door bracket

• Disconnect power to the appliance before starting any repair
• Remove contents and, if needed, the freezer door to access the bracket
• Use proper tools and keep hardware organized; replace any damaged screws or fasteners

This left freezer door bracket secures the freezer door to the cabinet and helps maintain proper alignment for smooth opening and closing. Replaces a bent or broken bracket to restore door support and fit. What it does:

• Supports the freezer door at the hinge area to keep the door properly aligned.
• Prevents door sagging that can cause gaps or improper sealing.
• Restores stable hinge movement for easier opening and closing.
• Helps maintain an even seal to reduce warm air intrusion.

• Power and water: unplug the appliance and shut off water before starting work.
• Use basic hand tools; remove the door or hinge cover per OEM procedure before replacing bracket.
• Keep door supported during removal/installation to prevent injury or damage.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This genuine OEM door handle kit manufactured by General Electric is intended to replace broken or detached door handles on refrigerators. This kit contains three handles.The door handles on the refrigerator can become broken over time, often due to bending, denting, corroding, or otherwise becoming detached. In such cases, the user may not be able to efficiently open or close the refrigerator doors. This replacement can be completed with standard household tools.This OEM part is sourced from the manufacturer and is compatible with refrigerators from General Electric, Hotpoint, RCA, and other brands. This part has been made from high-quality, durable, non-corrosive metal and is only sold individually.