Parts for Kenmore 596.79243014 (59679243014, 596 79243014): Freezer Door Parts

This replacement door gasket seals a refrigerator door to help maintain proper internal temperatures and reduce condensation. It restores the seal so the appliance can keep food fresh and minimize frost buildup around the door. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out.
• Helps prevent moisture, frost, and ice build-up around the door edges.
• Reduces temperature fluctuations that can cause food spoilage or localized warm spots.
• Corrects common symptoms like a door that won't close fully, visible gaps, or excessive frosting around the door.

• Always unplug the appliance and remove stored food before starting any door gasket replacement.
• Clean and dry the gasket channel and mating surfaces before installing the new gasket to ensure a proper seal.
• Basic hand tools may be needed; some models require loosening hinge or trim hardware—refer to the model's service instructions.
• After installation, check the gasket seating around the full perimeter and allow time for the gasket to form to the door.

This mounting bracket secures and supports internal appliance components to keep assemblies aligned and reduce vibration. A simple replacement that restores proper fit and stops rattling or loose panels caused by a broken or bent bracket. What it does

• Provides a rigid anchor point to hold panels, assemblies or hardware in place
• Keeps components aligned to prevent rubbing, vibration and noise
• Restores proper fit where a worn or damaged bracket caused gaps or looseness
• Helps maintain safe operation by preventing parts from shifting during use

• One mounting bracket

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Basic hand tools (screwdriver, nut driver) typically required; retain removed fasteners for reassembly
• Handle edges carefully; metal parts may be sharp
• for exact bracket location and proper reassembly

This upper freezer bin provides a roomy, secure shelf for organizing frozen foods and keeping items visible. It replaces a cracked or worn bin so the freezer door stores items safely and tidily. What it does

• Replaces a damaged or broken upper freezer storage bin to restore door storage
• Holds frozen foods and containers to prevent items falling or shifting
• Keeps freezer contents organized and visible for easier access
• Fits into the designated upper freezer door slot and supports normal use

• One upper freezer bin

• Remove frozen items and open the freezer door fully before replacing the bin
• Slide the old bin out gently and align the new bin with the door tracks until it clicks into place
• No special tools usually required; handle with care to avoid cracking the new plastic

The Threaded Handle Anchor is an OEM part for Whirlpool refrigerators. This component is essential for securely attaching the refrigerator door handle to the door, ensuring that it remains firmly in place during regular use. The anchor fits into the door and provides a threaded connection point for the handle screws, offering stability and ease of use.

Common causes of a bad threaded handle anchor include wear and tear from frequent use, cross-threading during installation, or physical damage from excessive force or impact.

Symptoms of a bad threaded handle anchor include:

• The refrigerator door handle feeling loose or unstable
• Difficulty securing the handle to the door
• The handle detaching from the door
• Visible damage or stripping on the anchor threads

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement mounting bracket secures internal components to restore proper alignment and stability in your appliance. It helps stop unwanted movement, vibration, or misalignment that can cause noise or operational issues. What it does:

• Holds and stabilizes panels or components to maintain correct positioning
• Reduces vibration and rattling caused by loose mounts or worn supports
• Prevents sagging or shifting that can affect door or panel alignment
• Helps restore reliable operation by keeping parts fixed in place

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; retain original fasteners unless replacements are provided
• Compare bracket orientation and mounting holes to the original before fastening

This replacement glide supports and guides the upper freezer shelf so it slides smoothly and stays aligned. Restores proper shelf movement and helps prevent binding, sagging, or the shelf from tipping when loaded. What it does:

• Supports the freezer shelf and keeps it seated in the correct track.
• Guides shelf movement for smooth sliding in and out of the freezer.
• Reduces sticking, binding, or uneven sliding caused by a worn or broken glide.
• Helps prevent the shelf from tipping or falling when placing items on it.

• Disconnect power to the appliance before beginning any service.
• Access often requires removing the upper freezer shelf or drawer to reach the glide.
• Remove the old glide and snap or slide the replacement into the same mounting location; use appropriate tools and avoid forcing parts.
• Inspect the shelf edge and track for damage and clean mating surfaces before installing.

Upper freezer glide that supports and guides the freezer drawer for smooth opening and closing. Replaces a worn or damaged glide to help eliminate binding, scraping, and uneven drawer movement. What it does:

• Guides and supports the upper freezer drawer for smooth travel; a failed glide often causes the drawer to stick or catch.
• Reduces metal-on-metal contact and scraping noises when opening or closing the drawer.
• Helps restore proper drawer alignment to prevent uneven gaps or rubbing against the cabinet.
• Lowers stress on adjacent components by returning consistent, even drawer movement.

• Disconnect power to the appliance before beginning any service work.
• Remove freezer contents and the drawer assembly per the manufacturer's instructions to access the glide.
• Replace the glide following the OEM diagram/steps; keep fasteners and mounting points aligned during reassembly.
• Test drawer operation after installation and adjust as needed for smooth, even travel.

This right-side retainer glide is a replacement glide that supports and guides the appliance drum for smooth rotation and reduced wear. It helps restore proper drum alignment and reduces scraping or grinding noises during operation. What it does:

• Provides a low-friction surface for the drum to ride on, keeping rotation stable
• Prevents metal-on-metal contact that can cause scraping or grinding sounds
• Helps correct drum wobble or uneven spinning caused by a worn glide
• Protects the drum and housing from accelerated wear

• One right-side retainer glide

• Disconnect power (and gas, if applicable) before beginning any repair
• Access generally requires removing the front panel or drum assembly; follow the factory service manual for your model
• Inspect mating surfaces and replace any other worn glides or bearings as needed for best results
• Use proper tools and wear safety gear