Parts for Kitchenaid KFIS29PBMS02: 07 - Freezer Door Parts

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This shaft is the replacement rotating shaft used to support and align the appliance drum or tub, restoring smooth rotation and reducing noise from worn or damaged drive components. What it does:

• Provides a stable mounting point for the drum/tub to rotate smoothly
• Transfers rotational motion and helps maintain drum alignment
• Prevents wobble and uneven wear caused by a damaged shaft
• Commonly replaces a worn or noisy shaft that causes grinding, scraping, or rough drum rotation

• Disconnect power to the appliance before starting any repair
• Some disassembly of the cabinet and drum/tub is required
• Inspect related rollers, bearings, seals and fasteners; replace any worn components to prevent repeat failure
• Use appropriate tools and safety gear

Note: This kit includes the Left and Right brackets.

Note: This kit includes the Left and Right brackets.

This lower pan assembly is the replacement drip tray that sits under the appliance to collect and channel moisture and condensate away from internal components, helping prevent water damage and maintain proper drainage. What it does:

• Catches and channels water from defrosting or condensation to the drain system
• Helps prevent water pooling beneath the unit that can cause leaks or floor damage
• Supports and protects lower internal components from moisture exposure
• Restores proper drainage when a cracked or warped pan causes leaks or overflow

• Disconnect power to the appliance before starting any repair
• Remove lower access panels and any stored water before replacing the pan
• Inspect surrounding seals, fasteners, and drain lines for damage and replace as needed
• Handle carefully to avoid damage to tabs or mounting surfaces; follow OEM instructions for proper fit

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

This replacement freezer bin is the main storage drawer that holds frozen food and lets you organize items for easy access. It restores the drawer storage area so you can use the freezer normally. What it does:

• Provides a secure, slide-in drawer to store and organize frozen foods
• Replaces cracked, broken, or missing freezer storage bins
• Restores proper fit and sliding function when the original bin is damaged
• Helps prevent items from shifting and keeps contents contained

• One freezer bin/drawer

• Empty the freezer compartment and remove any obstructions before installing
• Slide the bin into the tracks, aligning tabs or rails until it seats and moves smoothly
• If tabs or rails are damaged, inspect and replace those parts as needed
• For safety, handle glass shelves or sharp items carefully and follow manufacturer instructions; disconnect power if directed by the refrigerator service manual

This retainer clip secures the dishwasher's sump or collection chamber components in place to maintain a sealed, stable connection for reliable wash performance. A worn or missing clip can lead to leaks, vibration, or loose internal parts.

• Holds sump/collection chamber parts securely to prevent movement and leaks
• Helps correct issues like water leaking from the bottom, rattling noises, or a loose sump connection
• Restores proper alignment and sealing of the lower assembly
• Durable design for repeated service access and reassembly

• Disconnect power and turn off water before servicing
• Access is typically from underneath after removing the toe panel or lowering the sump assembly
• Inspect mating tabs and seals; replace any deformed or damaged parts
• Ensure the clip is fully seated and evenly engaged to lock components in place

This replacement divider keeps items separated and organized on a refrigerator shelf, restoring a secure partition that helps prevent spills and shifting during normal use. What it does

• Separates and organizes items on a refrigerator shelf or bin
• Helps prevent items from sliding into adjacent spaces and reduces spills
• Restores proper fit where a divider is cracked, broken, or missing
• Supports orderly storage and makes loading/unloading easier

• Remove all food and accessories from the shelf area before installing
• Typically snaps or slides into existing tracks—may require basic hand tools to access the shelf
• Inspect adjacent shelf clips or tracks and replace any damaged hardware to ensure proper fit

The Refrigerator Freezer Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms a seal around the freezer door, preventing warm air from entering and maintaining the internal temperature. The gasket measures approximately 20.83" x 34.45". 

Causes of a bad door gasket can include wear and tear over time, accidental damage, or hardening and cracking due to age. A compromised gasket can lead to temperature fluctuations and increased energy consumption as the appliance struggles to maintain the desired temperature.

Symptoms of a bad Refrigerator Freezer Door Gasket include:

• Frost buildup inside the freezer
• Excessive condensation or moisture around the door
• The door not closing tightly
• Increased energy bills due to the refrigerator working harder

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bracket is an OEM component specifically designed for Whirlpool brand refrigerators. This bracket is responsible for securely mounting internal refrigerator shelves and bins within the unit. 

Symptoms of a bad bracket can include sagging shelves, difficulty accessing bins, contents spilling or shifting during the opening and closing of the refrigerator door, and excess noise or rattling during compressor operation. 

Causes of a bad bracket include deterioration of mounting hardware over time, cracks or breaks in plastic mounting clips, and loose or faulty assembly.

Symptoms of a bad bracket include:

• Sagging or unsecured shelves   
• Bins that do not stay firmly in place
• Contents spilling out of bins  
• Excess noise and rattling from inside refrigerator

Note: Right side

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Left side

A threaded screw used to secure appliance components where an 8-16 thread is specified. Provides a straightforward replacement fastener to restore original fit and keep panels, brackets, and internal parts held securely. What it does:

• Fastens panels, brackets, trim, and small assemblies that use an 8-16 threaded fastener.
• Replaces missing, corroded, stripped, or damaged screws to stop rattling, gaps, or loose parts.
• Restores reliable mechanical connection after service or part replacement.
• Compatible where the OEM specifies an 8-16 screw for mounting or securing components.

• Use the correct driver to avoid stripping the head; start threads by hand to prevent cross-threading.
• Tighten until secure but avoid over-tightening to prevent damage to mounting holes or plastic parts.
• If working near electrical components, disconnect power and follow all safety precautions.
• Inspect mating threads and replace if damaged before installing this screw.

A right-hand stop pan that secures and positions the assembly to prevent over-travel and maintain proper alignment. Restores correct movement and helps reduce noise or binding caused by a damaged or missing stop pan. What it does:

• Holds the component in the correct position to limit travel and prevent contact with adjacent parts
• Helps maintain proper alignment for smooth operation
• Can reduce rubbing, binding, or abnormal noises when worn or broken
• Supports reliable function of the surrounding assembly

• Disconnect power (and water if applicable) before starting any repair
• Access may require removing exterior panels or trim; keep track of fasteners
• Inspect surrounding mounts and hardware; replace any damaged clips or screws

This left-side stop pan is a replacement mounting/support piece that helps hold and align the appliance's lower assembly while directing any incidental moisture away from internal components. It restores fit and quiet operation after damage or wear. What it does:

• Replaces a damaged or missing left-side stop pan that can allow panels to rub or sit unevenly
• Helps maintain proper alignment of the lower/front assembly and related trim
• Reduces rattling or vibration caused by loose or broken support parts
• Helps channel incidental drips away from sensitive components

• Disconnect power (and water, if applicable) before beginning any repair
• Removal of the front or lower access panel is commonly required; keep fasteners for reuse unless damaged
• Inspect adjacent clips and mounting tabs; replace if worn to ensure a secure fit