Parts for Kenmore 795.72373310 (79572373310, 795 72373310): Freezer Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This drawer tray assembly forms the shelf/frame that supports and guides a refrigerator drawer. Replacing a damaged tray restores smooth drawer operation and secure storage so bins slide correctly and items are held level.

• Provides the fixed frame the drawer rides on and supports the weight of stored items
• Keeps the drawer aligned on its tracks for easy opening and closing
• Maintains proper spacing and organization within the compartment
• Typical symptoms: cracked or broken frame/tabs, sagging drawer, binding, or falling off track

• Disconnect power and remove food from the affected area
• Slide the drawer(s) out and lift out the damaged tray
• Seat the new tray assembly fully on locator tabs/rails; avoid forcing cold, brittle plastic
• Reinstall the drawer(s) and verify smooth movement

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

Replacement drawer tray assembly that restores the interior storage surface of a refrigerator drawer, keeping foods contained and organized. Fits in place of a damaged or missing tray to help return normal drawer seating and use. What it does:

• Provides a stable surface for refrigerated items and keeps loose items from falling into the compartment below
• Replaces cracked, warped or broken trays that cause uneven seating or poor containment
• Helps the drawer sit and slide correctly when the tray is seated properly
• Keeps spills and crumbs contained on a removable surface for easier cleaning

• Remove all food and pull the drawer out to access the tray; your user manual for proper drawer removal steps
• Align the new tray with the drawer guides and seat it fully until it snaps or rests in the correct position
• Handle edges carefully; wear gloves if the old tray is cracked or jagged

Replacement drawer tray assembly that restores the interior storage surface of a refrigerator drawer, keeping foods contained and organized. Fits in place of a damaged or missing tray to help return normal drawer seating and use. What it does:

• Provides a stable surface for refrigerated items and keeps loose items from falling into the compartment below
• Replaces cracked, warped or broken trays that cause uneven seating or poor containment
• Helps the drawer sit and slide correctly when the tray is seated properly
• Keeps spills and crumbs contained on a removable surface for easier cleaning

• Remove all food and pull the drawer out to access the tray; your user manual for proper drawer removal steps
• Align the new tray with the drawer guides and seat it fully until it snaps or rests in the correct position
• Handle edges carefully; wear gloves if the old tray is cracked or jagged

This drawer tray assembly forms the shelf/frame that supports and guides a refrigerator drawer. Replacing a damaged tray restores smooth drawer operation and secure storage so bins slide correctly and items are held level.

• Provides the fixed frame the drawer rides on and supports the weight of stored items
• Keeps the drawer aligned on its tracks for easy opening and closing
• Maintains proper spacing and organization within the compartment
• Typical symptoms: cracked or broken frame/tabs, sagging drawer, binding, or falling off track

• Disconnect power and remove food from the affected area
• Slide the drawer(s) out and lift out the damaged tray
• Seat the new tray assembly fully on locator tabs/rails; avoid forcing cold, brittle plastic
• Reinstall the drawer(s) and verify smooth movement

This rail guide assembly supports and guides a refrigerator drawer so it opens and closes smoothly and stays aligned. Replace a worn or broken rail to restore proper drawer movement and prevent sagging or sticking. What it does:

• Supports the drawer on its track and helps keep it level during operation
• Guides the drawer to glide smoothly and prevents binding or catching
• Replaces damaged or cracked rails that cause noisy, uneven, or misaligned drawers
• Helps maintain proper drawer seal and storage alignment

• Disconnect power to the appliance before beginning repairs
• Remove the drawer and any obstructing shelves to access the rail assembly
• Inspect mounting clips and screws; replace any damaged fasteners as needed
• Reinstall drawer and test movement; do not force parts into place

This rail guide assembly keeps a drawer or sliding component aligned and operating smoothly, restoring proper travel and reducing binding or noise. It replaces worn or damaged guides to help parts open and close reliably. What it does:

• Provides a stable track for drawer or panel travel to prevent sticking or misalignment
• Reduces grinding, scraping, or rattling caused by worn guide surfaces
• Keeps moving parts centered to support smooth, even sliding motion
• Restores correct clearance when original guide is cracked, broken, or bent

• Disconnect power and remove any product panels or drawers before starting
• Typical install requires basic hand tools; handle plastic parts gently to avoid breakage
• Verify proper orientation and engagement of guide with mating slide before reassembling

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place