Parts for Lg LFX29927ST: Freezer Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

This replacement freezer tray holds and organizes frozen items inside the freezer compartment. Restore safe, stable storage and a proper fit when the original tray is cracked, warped, or missing.

• Provides a dedicated surface to store and organize frozen items
• Fits the designated location in the freezer to maintain proper spacing
• Replace if the tray is cracked, broken, warped, or missing
• If the tray no longer seats securely or items tip over, a new tray is needed

• Disconnect power to the refrigerator before servicing
• Remove food from the area and the damaged tray
• Allow plastic parts to warm slightly to reduce the risk of cracking
• Position the new tray fully into place and ensure it sits flat and secure

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This roller assembly supports and guides a sliding rack, shelf, or drawer so it rolls smoothly along its track. Replacing a worn roller restores easy, even movement and helps prevent sticking, wobbling, noise, or the rack/drawer jumping off the rail.

• Provides rolling support for a sliding component on its rail
• Maintains alignment to reduce binding and off-track jams
• Helps the rack/drawer glide quietly and evenly
• Common signs to replace: hard-to-slide movement, squeaking/grinding, wobble or tilt, or a cracked/missing wheel

• Disconnect power before servicing; shut off water supply if applicable to your appliance
• Remove the rack/drawer to access the roller; support moving parts while working
• Note roller orientation and re-use existing fasteners/clips as designed
• Replace both sides for even operation

The Freezer Tray Roller is an OEM part for LG refrigerators. It is a dual roller wheel assembly located at the rear wall of the freezer compartment. The roller aids sliding shelf movement by reducing friction between trays and the liner wall. 

Causes of a bad freezer tray roller include cracks, flat spots, or separated roller pieces from wear over years of use.

Symptoms of a bad tray roller are:

• Difficulty sliding shelves smoothly in and out of position
• Excessive force required to access stored items
• Noisy operation or rattling noises within the freezer

This genuine LG OEM replacement part is also compatible with some Kenmore models.

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This Drawer Tray Assembly forms the base/support for a refrigerator drawer. Replace a cracked or warped tray to restore proper fit, stable food storage, and smooth drawer operation.

• Provides a sturdy surface for the drawer and helps keep items contained and organized
• Restores correct seating and alignment so the drawer opens and closes smoothly
• Common failure signs: cracked or bowed tray, broken tabs, drawer wobble, or difficulty sliding

• Disconnect power and remove food from the affected drawer area
• Slide out the drawer; lift out the damaged tray and transfer any reusable trim or hardware from the original
• Seat the new tray fully and reinstall the drawer; do not force or overtighten any clips or screws

The Drawer Tray Assembly is an OEM replacement part for LG refrigerators with bottom freezer configurations. Located within the freezer storage compartment, it provides adjustable organization for items through movable sliding trays. Proper drawer functionality optimizes access and visibility.

Symptoms of a damaged drawer tray can include:

• Difficulty removing or replacing trays  
• Items toppling during drawer opening due to instability
• Food shifting between trays causing blockages
• Trays detaching completely from their mounting rails

Causes related to normal wear of plastic drawer guides and rollers over extensive use cycles. Damage may occur from heavy overloading beyond weight specifications as well.

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

This door stopper cushions and limits the appliance door's movement to reduce slamming and protect the cabinet and door edge. It restores smooth, quiet door operation and helps prevent damage from hard impacts. What it does:

• Acts as a bumper between the door and cabinet to absorb impact and reduce noise
• Keeps the door from over-travel or banging when opened or closed
• Helps stop chips, dents, and wear on the door edge and frame
• Commonly replaced when the existing stopper is worn, cracked, or missing

• Disconnect power or unplug the appliance before beginning any work.
• Inspect the mounting area and remove any old bumper before installing the new stopper.
• Many stoppers press into place; some models use a clip or screw—refer to your service manual for the correct method.