Parts for Ge PZS22MSKKHSS: Freezer Shelves Parts

The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.

You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in water and ice
• Cloudy or discolored water
• The filter indicator light on the refrigerator signaling a replacement

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore stable, easy-to-clean storage in your freezer with this replacement glass shelf. It provides a solid, level surface for organizing items and helps contain spills to keep the compartment tidy and functional.

• Provides a sturdy, level surface for food storage in the freezer
• Replaces a cracked, shattered, or missing shelf to restore capacity
• Helps contain minor spills for easier cleanup
• Common signs it's needed: visible glass damage, lost storage area, items tipping

• Remove food items, then lift out or slide out the old shelf
• Handle glass with two hands; wear cut-resistant gloves
• Set the new shelf onto the existing supports/tabs and ensure it's fully seated and level
• Do not force the shelf into place to avoid breakage

The Freezer Glass Shelf Assembly is an OEM part for GE refrigerators. This assembly includes the glass shelf and its supporting frame, designed to provide a stable and durable surface for organizing and storing items in the freezer. It helps maximize storage space and maintain proper airflow within the freezer compartment.

Causes of a bad freezer glass shelf assembly can include accidental impacts or heavy loads that cause the glass to crack or break, wear and tear over time, or damage to the supporting frame. 

Symptoms of a bad freezer glass shelf assembly include:

• Cracks or chips in the glass
• The shelf sagging or not fitting securely in place
• Difficulty in sliding or removing the shelf
• Items not staying level on the shelf

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This slide and bracket assembly replaces a worn or broken refrigerator drawer slide to restore smooth opening and secure drawer support. Designed to align and guide the drawer while preventing sagging or binding. What it does:

• Replaces the drawer slide and mounting bracket so the drawer glides correctly
• Supports the weight of the drawer and its contents to prevent sagging
• Helps stop sticking, rough movement, or misalignment when opening/closing the drawer
• Restores proper drawer tracking for full insertion and removal

• One slide and bracket assembly

• Intended for refrigerator drawer application; verify fit against your OEM part number before ordering
• Basic hand tools required; follow manufacturer's service manual for access and removal steps
• Disconnect power or unplug the appliance if accessing electrical components nearby
• If fasteners or clips are damaged, replace them with OEM-specified hardware

Slide liner for refrigerator drawers that supports smooth, protected movement and helps keep contents from catching on the drawer track. Replaces worn or damaged liners to restore correct drawer travel and reduce noise. What it does:

• Provides a low-friction surface so the drawer slides smoothly and evenly.
• Protects the drawer edge and track from wear, cracking, or catching.
• Helps reduce sticking, grinding, or squeaking during drawer operation.
• Restores proper alignment when a liner is torn, warped, or missing.

• Remove drawer and contents before installing; handle glass or fragile parts carefully.
• Clean the track and mating surfaces before fitting the new liner.
• Press or slide the liner into place until it seats fully; no special tools are typically required.
• If mounting clips or tracks are damaged, replace those parts to ensure a secure fit.

This fastener secures appliance components where a #8-18 AB hex-washer-head screw is specified. At 1/2 inch long, it restores a tight, reliable hold when an original screw is missing, damaged, or stripped.

• Secures brackets, panels, and covers where this size/thread is specified
• Replaces missing, stripped, or corroded screws
• Helps reduce vibration or rattling caused by loose fasteners
• Correct #8-18 AB thread and 1/2-in length for a precise fit

• Disconnect power before servicing; shut off water supply if working near water connections
• Compare to the original to confirm length and thread match
• Start threads by hand to prevent cross-threading; use the correct driver for the head type
• Tighten snugly; do not overtighten into plastic or thin sheet metal

• Thread: #8-18 (Type AB)
• Head: Hex-washer
• Length: 1/2 in