Parts for Ge ZISP420DTASS: 03 - Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

The Gal Bin FF Asm is an OEM part for GE refrigerators. This gallon door bin is designed to hold large containers, such as gallon jugs, in the refrigerator door, maximizing storage space and keeping items easily accessible. The door bin measures approximately 20 inches x 7 inches x 4.5 inches. 

Common causes of a bad bin include cracks from overloading, breakage due to impact, or wear and tear from frequent use.

Symptoms of a bad gallon bin assembly include:

• Cracks or visible damage on the bin
• The bin not fitting securely in the door
• Difficulty in placing or removing items
• The bin falling out or sagging under weight

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin Assembly is an OEM component for GE refrigerators. This component is designed to attach to the interior side of the refrigerator door, providing additional storage space for items such as condiments, beverages, and other frequently accessed products. The assembly is crafted to hold items securely while optimizing space usage within the refrigerator.

Causes for a malfunctioning Door Bin Assembly can include general wear from frequent use, excessive weight placed in the bin leading to cracks or breaks, or issues with the clips or connectors that attach it to the door.

Symptoms of a bad Door Bin Assembly include:

• The bin detaching from the door or sagging
• Visible cracks or damage on the bin
• Difficulty in fitting items into the bin due to warping or deformation
• Items not staying securely in place within the bin

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dairy bin is the removable refrigerator door shelf used to hold butter, small dairy items and condiments; it restores secure storage and organized door shelving. Fits the 42" wide door shelf position. What it does:

• Replaces a cracked, chipped or broken door dairy bin so items stay contained
• Restores proper storage on the refrigerator door to prevent spills and shifting
• Allows the door shelf to close and seal without obstruction from a damaged bin
• Provides an easily removable container for cleaning and loading small items

• One dairy bin

• Empty the door shelf and remove any previous bin before installing
• Align the bin tabs with the door shelf tracks and snap into place until secure
• Handle carefully to avoid chipping; do not force—if it won't seat smoothly, recheck alignment
• No special tools required; refer to your refrigerator manual for detailed removal/installation instructions

The FF Door Gasket 42 is an OEM part for GE refrigerators. This gasket creates a seal around the refrigerator's fresh food compartment door, preventing warm air from entering and ensuring that the cool air stays inside. This helps maintain the internal temperature and improves energy efficiency.

Common causes of a bad door gasket include constant opening and closing of the door, exposure to food spills, and general wear and tear. A compromised gasket can lead to air leaks, reducing the refrigerator's cooling efficiency and potentially causing food spoilage.

Symptoms of a bad door gasket include:

• Warm spots inside the refrigerator
• Increased energy bills due to the refrigerator working harder to maintain temperature
• Condensation or frost buildup around the door seal
• Visible cracks, tears, or deformation in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This 1/4-20 x 3/8 hex-head screw secures components on compatible appliances, restoring proper fit and preventing looseness. Use it when a worn or missing fastener causes rattling, poor alignment, or parts that won't stay in place. What it does:

• Fastens panels, brackets, or assemblies where a 1/4-20 thread is specified
• Replaces stripped, corroded, or missing screws that cause vibration or rattling
• Restores proper alignment and secure mounting of affected components
• Provides the correct thread pitch and head style for a firm hold

• One 1/4-20 x 3/8 hex-head screw

• Use the matching driver or socket; avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance before accessing internal components
• If replacing multiple fasteners, swap all like screws for even fit and torque