Parts for Ge ZISP480DTASS: 03 - Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Specs: 8-18 AB IHW 5/8 S

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

The Door Shelf Bin Assembly is an OEM part for GE refrigerators. This part fits onto the refrigerator door, providing additional storage space for items such as bottles, jars, and condiments.  

Causes of a bad shelf bin can include regular wear and tear, overloading with heavy items, or physical damage from impacts.  

Symptoms of a bad door shelf bin assembly include:

• Cracks or breaks in the bin
• The bin not fitting securely on the door
• Difficulty in holding items steadily
• The bin becoming loose or detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore door storage with this door bin assembly. It replaces a cracked, warped, or missing bin so bottles, condiments, and small items stay organized, easy to grab, and less likely to tip or fall.

• Mounts on the inner door to hold jars, bottles, and condiments
• Restores proper fit when original bin tabs or edges are broken
• Helps keep items upright and reduces spills or rattling
• Common signs it's needed: cracked bin, broken front edge, bin falls off, lost door storage

• Empty the old bin; lift up and pull out of the door channels
• Align the new bin's tabs with the same door slots and press down until it seats securely
• Some bins are position-specific; match the size/shape to the original location
• Disconnect power if working near lighting or controls; handle plastic edges carefully

This dairy bin is the removable refrigerator door shelf used to hold butter, small dairy items and condiments; it restores secure storage and organized door shelving. Fits the 42" wide door shelf position. What it does:

• Replaces a cracked, chipped or broken door dairy bin so items stay contained
• Restores proper storage on the refrigerator door to prevent spills and shifting
• Allows the door shelf to close and seal without obstruction from a damaged bin
• Provides an easily removable container for cleaning and loading small items

• One dairy bin

• Empty the door shelf and remove any previous bin before installing
• Align the bin tabs with the door shelf tracks and snap into place until secure
• Handle carefully to avoid chipping; do not force—if it won't seat smoothly, recheck alignment
• No special tools required; refer to your refrigerator manual for detailed removal/installation instructions

Restore a tight, energy-saving seal on your refrigerator. This magnetized fresh-food door gasket keeps cold air in and warm air out, helping maintain temperature, reduce frost and moisture, and prevent the compressor from overworking.

• Seals the refrigerator compartment door to the cabinet
• Helps maintain stable temperatures and humidity
• Can reduce condensation, frost buildup, and energy loss from air leaks
• Worn or torn gasket may cause doors not to seal, warm spots, or excess run time

• Unplug appliance before service; wear cut-resistant gloves
• Soften gasket in warm water or with a hair dryer on low to ease installation
• Remove retaining screws or pull from retainer (design varies), then seat new gasket fully in the groove
• Check for uniform contact all around; adjust door hinges/leveling if needed

This 1/4-20 x 3/8 hex-head screw secures components on compatible appliances, restoring proper fit and preventing looseness. Use it when a worn or missing fastener causes rattling, poor alignment, or parts that won't stay in place. What it does:

• Fastens panels, brackets, or assemblies where a 1/4-20 thread is specified
• Replaces stripped, corroded, or missing screws that cause vibration or rattling
• Restores proper alignment and secure mounting of affected components
• Provides the correct thread pitch and head style for a firm hold

• One 1/4-20 x 3/8 hex-head screw

• Use the matching driver or socket; avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance before accessing internal components
• If replacing multiple fasteners, swap all like screws for even fit and torque