Parts for Ge ZISS480DRDSS: 03 - Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a refrigerator handle kit. This kit includes one handle that has a stainless steel finish. The purpose of the handle is to provide a piece to hold onto to open the refrigerator door. The handle could become damaged if it comes into forceful impact with another object. It can become dented or scratched. If the stainless steel finish begins to wear over time, this part will be a high-quality replacement. Save the screws from the original handle to install the one one. Replacing this part is very easy and can be done quickly by following the installation instructions. Some people may wish to wear work gloves to protect their hands during the replacement process.This specific handle kit is compatible with refrigerator units that are manufactured by the General Electric brand, including Hotpoint and RCA. It is sold individually and is sourced directly from the manufacturer.

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

This euro standoff kit provides the mounting hardware used to secure trim panels and components on compatible appliances, restoring proper panel alignment and preventing rattles or loose trim. It's a direct-fit replacement for the listed part number. What it does:

• Replaces worn or damaged mounting standoffs that hold panels or trim in place
• Restores secure panel attachment to reduce vibration, rattling, or misalignment
• Helps maintain proper spacing between panels and cabinet for correct fit and finish
• Designed to match the original part's fit and function for reliable repair

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove affected trim/panel carefully to access standoffs; retain screws and hardware
• Install standoffs in the original locations and tighten screws until snug — do not overtighten
• If alignment issues persist after replacement, check adjacent clips, fasteners, and mounting surfaces

This screw set contains #10-32 thread fasteners used to secure appliance panels and components. It provides direct-fit replacement screws to restore proper fastening and stop loose or rattling parts. What it does:

• Replaces missing or damaged #10-32 screws used on appliances
• Secures panels, brackets, trim pieces, and internal components
• Helps eliminate rattling, vibration noise, and loose fittings
• Restores factory fastening for safe, stable operation

• Disconnect power and water before servicing the appliance
• Keep small parts organized and use a magnetic tray to avoid loss
• Use the correct driver to avoid stripping screw heads; do not overtighten

This is a #10-32 x 3/4 truss-head screw designed to fasten small appliance panels and components securely. It replaces missing or worn fasteners to restore stable mounting and reduce rattles or movement. What it does:

• Secures trim, control panels, brackets, and small assemblies
• Restores tight mounting to stop panel vibration or rattling
• Keeps electrical and mechanical components properly aligned
• Works where a #10-32 machine screw with a short 3/4" length and truss head is required

• Disconnect power before working on the appliance
• Use the correct screwdriver or nut driver to avoid stripping the head
• Tighten until secure; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized for reinstallation

This bottom door hinge supports the appliance door and lets it pivot smoothly for reliable opening and closing. It restores proper door alignment to help maintain an effective seal and prevent sagging or uneven gaps. What it does:

• Provides a stable pivot point for the lower edge of the door so it opens and closes correctly
• Restores proper door alignment to improve sealing and temperature retention
• Stops door sagging or misalignment that can cause rubbing or uneven gaps
• Reduces clicking or binding during door movement when worn or damaged

• Unplug the appliance or turn off power at the breaker before starting work.
• Remove food and shelves as needed and support the door while removing fasteners to prevent dropping.
• Keep original fasteners; reuse if undamaged or replace with OEM hardware.

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

The Door Shelf Bin Assembly is an OEM part for GE refrigerators. This part fits onto the refrigerator door, providing additional storage space for items such as bottles, jars, and condiments.  

Causes of a bad shelf bin can include regular wear and tear, overloading with heavy items, or physical damage from impacts.  

Symptoms of a bad door shelf bin assembly include:

• Cracks or breaks in the bin
• The bin not fitting securely on the door
• Difficulty in holding items steadily
• The bin becoming loose or detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore door storage with this door bin assembly. It replaces a cracked, warped, or missing bin so bottles, condiments, and small items stay organized, easy to grab, and less likely to tip or fall.

• Mounts on the inner door to hold jars, bottles, and condiments
• Restores proper fit when original bin tabs or edges are broken
• Helps keep items upright and reduces spills or rattling
• Common signs it's needed: cracked bin, broken front edge, bin falls off, lost door storage

• Empty the old bin; lift up and pull out of the door channels
• Align the new bin's tabs with the same door slots and press down until it seats securely
• Some bins are position-specific; match the size/shape to the original location
• Disconnect power if working near lighting or controls; handle plastic edges carefully

This replacement dairy bin restores a sealed, organized compartment inside the refrigerator door so you can keep butter, cheese and small items contained and easy to access. Designed to match the original door bin size and fit. What it does:

• Provides a covered compartment for dairy and small food items to prevent shifting and spills
• Replaces cracked, warped or missing door bins that no longer hold items securely
• Helps restore proper organization and usable storage space on the refrigerator door
• Fits into existing door rail slots and snaps into place like the original

• One dairy bin (48")

• Remove all contents from the door and empty the bin area before installing
• Align the bin with the door rail slots and press in until it snaps securely into place
• Inspect door rails for damage; replace rails if the bin does not seat properly
• No special tools required;

Restore a tight, energy-saving seal on your refrigerator. This magnetized fresh-food door gasket keeps cold air in and warm air out, helping maintain temperature, reduce frost and moisture, and prevent the compressor from overworking.

• Seals the refrigerator compartment door to the cabinet
• Helps maintain stable temperatures and humidity
• Can reduce condensation, frost buildup, and energy loss from air leaks
• Worn or torn gasket may cause doors not to seal, warm spots, or excess run time

• Unplug appliance before service; wear cut-resistant gloves
• Soften gasket in warm water or with a hair dryer on low to ease installation
• Remove retaining screws or pull from retainer (design varies), then seat new gasket fully in the groove
• Check for uniform contact all around; adjust door hinges/leveling if needed