Parts for Ge GBE21DGKLRWW: Fresh Food Door Parts

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly

This white replacement door gasket seals the refrigerator compartment to help maintain proper cooling and prevent warm air from entering. Replacing a worn gasket restores a tighter seal for more efficient, reliable operation. What it does:

• Seals the refrigerator door to keep cold air inside and reduce energy loss
• Helps prevent frost buildup and condensation caused by air leaks
• Reduces temperature fluctuations that can affect food freshness
• Fits as the door perimeter seal where the original gasket has torn, warped, or lost flexibility

• One white refrigerator door gasket

• Remove power to the appliance before replacing the gasket to avoid electrical hazards
• Clean the door flange and allow it to dry before installing the new gasket for best adhesion and fit
• Warm or soften the new gasket (per OEM guidance) if necessary to ease installation and ensure a uniform seal

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This full-width refrigerator door bin mounts to the inner door to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, organized door storage and help maintain your refrigerator's usable capacity.

• Attaches to the refrigerator door liner and provides additional shelf storage
• Helps organize items and keep them from tipping during door movement
• Replace if cracked, warped, or if mounting tabs are broken
• Symptoms include the bin falling off, not sitting level, or reduced door storage space

• Disconnect power and remove items from the affected door area before starting
• Lift out the damaged bin and clean the mounting area if needed
• Align the new bin's tabs/hooks with the door slots and press down until fully seated
• Verify the bin is secure before reloading items; distribute weight evenly

This door shelf module replaces a damaged or missing bin on your refrigerator door, restoring secure, organized storage for condiments, jars, and bottles. It snaps into the door liner to keep items accessible and in place.

• Provides on-door storage to hold bottles, jars, and condiments securely
• Replaces cracked or broken bins and restores usable door space
• Helps correct poor fit when mounting tabs are worn or broken
• Common symptoms: bin cracked, won't stay seated, sags, or items tip/fall

• Remove items from the existing bin and open the door fully
• Lift the old bin straight up to disengage it from the door rails or tabs
• Align the new module with the mounting slots, then lower/press until it locks in place
• Confirm a secure fit before reloading items

The Force Closure is an OEM part for GE refrigerators responsible for ensuring a secure and tight closure of the refrigerator door, keeping the cold air inside and maintaining proper temperature levels.

A bad force closure can be caused by normal wear and tear or damage due to mishandling or impact. If you notice that your refrigerator door is not closing properly or if there is a gap between the door and the refrigerator body, it may indicate a problem with the force closure.

Symptoms of a bad force closure include:

• Difficulty in fully closing the refrigerator door
• Door not staying securely closed
• Excessive condensation or frost buildup around the door seal
• Uneven or inconsistent cooling inside the refrigerator

Replace your faulty force closure with this OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The White Door Handle is an OEM part for GE refrigerators. It is located on the outside of the refrigerator door and provides an ergonomic grip point for easy opening and closing of the door. The handle plays an important role in the overall user experience of the refrigerator by facilitating convenient access in and out of the unit. 

Symptoms of a bad door handle include:

• The handle is loose, wobbly, or detached from the door 
• Cracks or breaks in the plastic material
• Sharp or rough edges that can cut or scratch
• Difficulty gripping or lifting the door when opening

 Replacing yours with this genuine OEM GE part will restore full functionality to your refrigerator door. This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.