Parts for Ge GBE21DSKARSS: Fresh Food Door Parts

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly

The Refrigerator Door Gasket is an OEM replacement part for GE refrigerators, designed to create an airtight seal when the refrigerator door is closed. This gasket ensures that cold air remains inside, contributing to energy efficiency and maintaining the desired temperature within the refrigerator. It fits snugly along the perimeter of the refrigerator door and prevents warm air from entering the refrigerator compartment.

Over time, door gaskets can wear out or become damaged due to frequent use, exposure to temperature changes, or natural aging. A compromised gasket may develop tears, lose its flexibility, or start to crack, which can allow air leakage and reduce the efficiency of your refrigerator.

Symptoms of a bad Refrigerator Door Gasket include:

• Warm spots in the refrigerator
• Condensation or frost buildup around the door seal
• Higher energy bills due to the fridge working harder
• Refrigerator running continuously to maintain temperature 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This full-width refrigerator door bin mounts to the inner door to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, organized door storage and help maintain your refrigerator's usable capacity.

• Attaches to the refrigerator door liner and provides additional shelf storage
• Helps organize items and keep them from tipping during door movement
• Replace if cracked, warped, or if mounting tabs are broken
• Symptoms include the bin falling off, not sitting level, or reduced door storage space

• Disconnect power and remove items from the affected door area before starting
• Lift out the damaged bin and clean the mounting area if needed
• Align the new bin's tabs/hooks with the door slots and press down until fully seated
• Verify the bin is secure before reloading items; distribute weight evenly

This door shelf module replaces a damaged or missing bin on your refrigerator door, restoring secure, organized storage for condiments, jars, and bottles. It snaps into the door liner to keep items accessible and in place.

• Provides on-door storage to hold bottles, jars, and condiments securely
• Replaces cracked or broken bins and restores usable door space
• Helps correct poor fit when mounting tabs are worn or broken
• Common symptoms: bin cracked, won't stay seated, sags, or items tip/fall

• Remove items from the existing bin and open the door fully
• Lift the old bin straight up to disengage it from the door rails or tabs
• Align the new module with the mounting slots, then lower/press until it locks in place
• Confirm a secure fit before reloading items

The Door Plug Button is an OEM replacement part for GE refrigerators. It is designed to cover the hole left in the refrigerator door when the door hinge is not installed on that side. This stainless steel plug button gives your refrigerator a clean and seamless appearance.

A bad door plug button can be caused by wear and tear over time or accidental damage. If you notice cracks, discoloration, or any other damage to the plug button, it is recommended to replace it with this genuine OEM part.

Symptoms of a faulty door plug button include:

• A hole in the refrigerator door
• Inability to cover the opening properly
• Missing or damaged plug

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Force Closure is an OEM part for GE refrigerators responsible for ensuring a secure and tight closure of the refrigerator door, keeping the cold air inside and maintaining proper temperature levels.

A bad force closure can be caused by normal wear and tear or damage due to mishandling or impact. If you notice that your refrigerator door is not closing properly or if there is a gap between the door and the refrigerator body, it may indicate a problem with the force closure.

Symptoms of a bad force closure include:

• Difficulty in fully closing the refrigerator door
• Door not staying securely closed
• Excessive condensation or frost buildup around the door seal
• Uneven or inconsistent cooling inside the refrigerator

Replace your faulty force closure with this OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Handle Kit is an OEM part for GE refrigerators. This kit includes one Freezer and one Refrigerator handle and all necessary mounting fasteners. 

These handles work together to provide easy access and opening of the refrigerator. Their symmetrical design maintains a balanced, cohesive appearance along the fridge façade.

Causes of bad handle kits are generally normal wear over many years and extensive use. Harsh chemicals or impacts during cleaning could potentially degrade handle integrity faster.

Symptoms of a bad handle kit include:  

• Loose, wobbly, or missing handles that are difficult to grip
• Cracked, broken, or mismatched handle pieces
• Fasteners that have corroded or become disconnected

This genuine GE replacement restores usable handles with factory-style fittings. Customers appreciate the kit's convenience of replacing both sides seamlessly. It is also compatible with Hotpoint, RCA and select Kenmore models.

The Stainless Steel Door Handle is an OEM part for GE refrigerators. It is the exterior handle located on the refrigerator and freezer doors that allow for easy opening and closing access.

Causes of a bad door handle can include damage, wear and tear over time that reduces functionality, or corrosion compromising the smooth operation and durable finish of the handle.

Symptoms of a failure include:

• Difficulty opening or closing the refrigerator doors  
• Loose, awkward, or improper movement of the handle
• Chipped paint, rusting, or deterioration of exterior surface
• Reduced aesthetic appeal detracting from overall appliance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.