Parts for Ge GYE18JSLDFSS: Fresh Food Door - Rh Parts

This refrigerator door gasket replaces a worn or damaged door seal to restore a tight closure. A proper seal helps keep cold air in, reduce moisture and frost, and maintain consistent temperatures for better food preservation.

• Forms an airtight seal between the door and cabinet to contain cold air
• Helps maintain stable internal temperatures and efficiency
• Can reduce condensation or frost around the door opening
• Helps with symptoms like a door not sealing, gaps, or warm spots inside

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove the old gasket and clean the door channel and mating surfaces
• Warm the new gasket in hot water to relax bends; press fully into the door channel starting at the corners
• After installation, ensure even contact all around; use low, controlled heat only if needed to smooth waves, and avoid overheating plastics

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This cam closure is the small pivot piece that helps the refrigerator fresh-food door close and stay aligned. Replacing a worn or broken cam restores smooth door movement and helps the door seal evenly to maintain cooling. What it does:

• Guides the fresh-food door cam so the door pivots and latches correctly.
• Helps correct sticking doors, doors that hang or bind, and uneven gaps that can let cold air escape.
• Replaces a worn, cracked, or broken closure that can cause misalignment or noisy door operation.

• Disconnect power or unplug the refrigerator before beginning any work.
• Remove the door or access trim per the manufacturer's instructions to reach the cam area; keep track of hinge pins and fasteners.
• Pry or pop out the old cam and press the replacement into the cam slot until it snaps into place; check door alignment and operation after installation.

The Stainless Steel Door Handle is an OEM part for GE refrigerators. It is the exterior handle located on the refrigerator and freezer doors that allow for easy opening and closing access.

Causes of a bad door handle can include damage, wear and tear over time that reduces functionality, or corrosion compromising the smooth operation and durable finish of the handle.

Symptoms of a failure include:

• Difficulty opening or closing the refrigerator doors  
• Loose, awkward, or improper movement of the handle
• Chipped paint, rusting, or deterioration of exterior surface
• Reduced aesthetic appeal detracting from overall appliance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Shelf Door Module is an OEM replacement part for GE refrigerators. This door shelf can fit both left and right doors, depending on your refrigerator model. For models with an external ice and water dispenser, the door shelf bin will be used on the right door only.

Causes of a bad shelf door module can include damage from unexpected door impacts or overloading the shelves over time. Repeated interior cleansings using improper chemicals may also degrade gaskets and seals.

Symptoms of a bad shelf door module include: 

• Difficulty opening or closing the shelves smoothly  
• Leaks or wet shelves from failed door seals
• Loss of an organized storage section inside
• Restricted access to shelves due to misalignment

This OEM part is also compatible with Hotpoint, RCA and some Kenmore models. 

The Lower Door Bin is an OEM replacement part for GE refrigerators. It is designed to provide storage space and organization on the lower right side of your refrigerator door.

A bad lower door bin can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as a cracked or broken bin, difficulty in storing items on the door, or items falling off the shelf, it may indicate a faulty or malfunctioning lower door bin.

Symptoms of a bad lower door bin include:

• Cracked or broken bin
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's lower right door by replacing the faulty shelf bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.