Parts for Ge PFSS5PJYCSS: 05 - Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This slide and bracket assembly supports and guides a refrigerator shelf so it moves smoothly and stays level. Replaces worn or damaged slides to restore stable shelf operation and prevent sagging or sticking. What it does:

• Provides a guided track and mounting bracket for a refrigerator shelf to slide in and out
• Restores smooth shelf movement when the shelf sticks, binds, or falls out of alignment
• Keeps the shelf level and properly supported to prevent tipping or sagging under load
• Works where original slide hardware is cracked, bent, or worn

• Disconnect power to the appliance and remove stored items from the shelf area before starting
• Remove the old slide assembly and fasteners; preserve screws if they are undamaged and re-usable
• Use common hand tools (screwdriver, nut driver) and handle edges carefully to avoid cuts

This Slide & Bracket Assembly restores smooth drawer movement by replacing a worn or broken refrigerator drawer slide. It helps keep the drawer aligned and operating properly so food storage compartments open and close reliably. What it does:

• Replaces damaged or bent drawer slide and mounting bracket that cause sticking or uneven movement
• Restores smooth sliding action and proper drawer alignment
• Prevents drawers from dropping or coming off their track
• Addresses symptoms like a drawer that sticks, tilts, or won't stay level

• One slide and bracket assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the drawer and any stops or clips to access mounting screws; basic hand tools are typically required
• Align the bracket and slide, secure all fasteners, then test drawer movement before returning contents

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

This is a replacement gasket for the refrigerator pan/vegetable drawer frame that helps restore a proper seal around the produce drawer to reduce air exchange and help maintain stored-food freshness. Fits the pan/frame channel for a direct OEM-style replacement. What it does:

• Seals the vegetable/crisper pan area to limit warm or moist air from entering the drawer
• Helps reduce excess condensation and premature spoilage of produce
• Restores proper drawer fit and alignment when the original gasket is worn or damaged
• Can stop minor air leaks around the pan frame that contribute to uneven cooling

• One replacement gasket for the pan/vegetable frame

• Remove the drawer and any clips or screws securing the frame before replacing the gasket
• Clean the mating channel of debris and old adhesive/sealant before installing the new gasket
• Press the gasket evenly into the frame channel; work around the perimeter to ensure a full seat
• Unplug the refrigerator or turn off power before starting

This meat pan frame is the replacement support that holds the deli/meat pan securely in the refrigerator crisper area, restoring proper fit and preventing the pan from sagging or shifting. What it does:

• Supports and stabilizes the deli/meat pan so it stays level and slides correctly
• Helps maintain proper airflow and organization in the crisper/deli section
• Replaces a cracked, bent, or missing frame that lets the pan shift or fall
• Reduces risk of spills and food contact with damaged cabinet edges

• Unplug the appliance or disconnect power before servicing
• Remove food and the deli/meat pan before installing the frame
• Typically installs with simple clips or screws; hand tools may be required
• Inspect adjacent trim and fasteners and replace any damaged pieces for a secure fit

This inlet meat pan gasket seals the meat pan/deli drawer area to help maintain proper compartment airflow and reduce moisture and odors. It restores a tighter seal for more consistent internal temperatures and fresh storage. What it does:

• Replaces a worn or torn inlet gasket that lets air leak around the meat/deli pan
• Helps reduce moisture buildup and frost near the drawer area
• Can improve temperature consistency inside the deli/meat compartment
• Reduces food odors caused by gaps in the seal

• One inlet meat pan gasket

• Disconnect power to the appliance before starting any repair
• Remove the drawer/pan to access and clean the gasket seating area prior to install
• Press the gasket fully into its channel, ensuring an even, continuous seal around the opening
• Inspect for proper fit and reassemble drawer; check drawer operation and seal after reinstall

This vegetable pan support assembly holds and guides the crisper/vegetable drawer so it opens smoothly and keeps the cover/shelf above level. Replace a damaged support to restore proper drawer alignment and prevent sagging or sticking. What it does:

• Supports the crisper/vegetable drawer and the cover/shelf it rides on
• Maintains level alignment to reduce binding, scraping, or tipping
• Provides a stable track point for smooth drawer movement
• Common symptoms: drawer tilts, binds, or falls; shelf sags; visible cracks or broken tabs on the support

• 1 vegetable pan support assembly

• Unplug the refrigerator before servicing
• Remove the crisper drawer and cover/shelf to access the support
• Match the new support's orientation to the original; transfer any reusable hardware if applicable
• Seat the support fully and securely before reinstalling the cover/shelf and drawer; test drawer travel

This right-side replacement front for the refrigerator vegetable/crisper pan restores the drawer face and helps keep produce contained and sealed within the crisper area. Use it to replace a cracked, broken or missing front panel. What it does:

• Replaces a damaged or cracked right-side vegetable/crisper pan front to restore drawer fit and appearance
• Helps keep fruits and vegetables contained and prevents items from falling out when opening the drawer
• Supports proper drawer alignment to maintain an effective refrigerator seal and airflow around the crisper
• Visible cosmetic repair for scratched, cracked or broken drawer fronts

• Remove produce and slide the crisper drawer out to access the front panel.
• Many installations are tool-free; the front snaps or slides into the drawer frame—inspect clips and align before pressing into place.
• Handle edges carefully; dispose of broken plastic pieces safely.

This slide-out wire shelf assembly provides a stable, easy-access surface for storing refrigerated items and lets you pull contents forward for convenient reach. It restores smooth slide action and proper shelf support. What it does

• Replaces a damaged, bent, or missing slide-out shelf to restore stable storage
• Enables shelves to glide in and out smoothly for easier access to items
• Prevents items from shifting or falling when opening the shelf
• Helps eliminate loud scraping or catching when sliding the shelf

• Unplug or disconnect power to the appliance before starting any service
• Remove food and any loose items from the shelf before removal
• Slide the old shelf out, lift to disengage from its tracks, then align and seat the new assembly into the tracks
• If hardware is present, tighten screws securely but avoid over-torquing

This slide-out wire shelf assembly provides a stable, easy-access surface for storing refrigerated items and lets you pull contents forward for convenient reach. It restores smooth slide action and proper shelf support. What it does

• Replaces a damaged, bent, or missing slide-out shelf to restore stable storage
• Enables shelves to glide in and out smoothly for easier access to items
• Prevents items from shifting or falling when opening the shelf
• Helps eliminate loud scraping or catching when sliding the shelf

• Unplug or disconnect power to the appliance before starting any service
• Remove food and any loose items from the shelf before removal
• Slide the old shelf out, lift to disengage from its tracks, then align and seat the new assembly into the tracks
• If hardware is present, tighten screws securely but avoid over-torquing

This cover flip lid assembly replaces a worn or damaged ice maker/ice bin lid to keep stored ice covered and help prevent spills and contamination. It restores the lid function so the ice bin opens and closes smoothly. What it does:

• Covers the ice storage area to keep ice cleaner and reduce exposure to odors
• Provides a hinged lid that flips open for easy access to ice
• Helps prevent ice from spilling when removing the bin
• Restores proper lid alignment and operation when the old lid is cracked or broken

• Disconnect power to the appliance before beginning any work.
• Remove the ice bin and any obstructions to access the lid assembly.
• Align the hinge and snap or secure the lid into place using existing fasteners; do not force parts.
• Reinstall the ice bin, restore power, and verify the lid opens and closes smoothly.