Parts for Ge GFSF2KEXABB: 05 - Fresh Food Shelves Parts

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

This vegetable pan cover frame supports the glass shelf above the crisper drawers and forms the rails the drawers slide on. Replacing a cracked or warped frame keeps the shelf stable and the crisper drawers aligned and moving smoothly.

• Supports the glass shelf over the vegetable/crisper pans in the fresh food section
• Provides slide rails and alignment for the crisper drawers
• Helps prevent shelf sagging and glass shifting
• Typical symptoms: broken tabs, drawers binding or dropping, unstable or uneven shelf

• Unplug the refrigerator and remove food from the crisper area
• Carefully remove the glass insert and set it aside; wear cut-resistant gloves when handling glass
• Lift out the old frame and set the new frame onto the side supports, fully seated and level
• Reinstall the glass and drawers; confirm drawers slide smoothly

The Slide Pan Right Hand is an OEM part for GE refrigerators. This component supports and guides the movement of the refrigerator's crisper or deli drawer, allowing it to slide in and out smoothly. It ensures easy access to stored food items and helps maintain proper alignment and functionality of the drawer.

Causes of a bad slide pan can include wear and tear from regular use, damage from overloading the drawer, or accidental impact that leads to bending or breaking. Ensuring the slide pan is in good condition is essential for the smooth operation of the refrigerator drawers.

Symptoms of a bad slide pan include:

• Difficulty in opening or closing the drawer
•  The drawer not staying aligned or securely in place
• Noticeable wobbling or uneven movement of the drawer
• The drawer falling off its tracks

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Left Hand Pan Slide is an OEM part for GE refrigerators. This part allows the crisper or deli drawer to smoothly slide in and out, ensuring easy access to stored items.

Causes of a bad pan slide can include wear and tear from frequent use, physical damage such as cracking or breaking, or misalignment due to heavy loads or improper handling.

Symptoms of a bad pan slide include:

• Difficulty in sliding the drawer in or out
• The drawer getting stuck or not staying in place
• Noisy or rough movement when opening or closing the drawer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement humidity control knob lets you open and close the crisper drawer vent so you can better manage drawer moisture for produce storage. Fits on the factory control shaft and restores tactile grip for setting vent position. What it does:

• Replaces a cracked, loose, or missing humidity control knob used to open/close the crisper vent
• Restores a positive feel for adjusting drawer airflow to help retain produce freshness
• Stops slipping or stripped knob issues that prevent changing vent position
• Matches OEM fit for straightforward engagement with the control shaft

• Usually pulls straight off the control shaft; push the new knob fully onto the shaft until seated
• No special tools typically required, but use a gentle, even pull to remove the old knob
• When working inside the refrigerator, take care around sharp sheet metal and food items; disconnect power if you need to move internal assemblies

This #8-18 x 5/8-inch Torx T20 screw secures panels, brackets, and trim in your appliance. It replaces missing or damaged hardware to restore a tight, reliable hold and reduce looseness or rattling.

• Fastens sheet-metal or plastic components to the appliance cabinet or frame
• Replaces missing, stripped, or corroded screws to maintain proper fit
• Helps reduce vibration and rattling from unsecured parts
• Torx T20 drive; #8-18 thread; 5/8-inch length

• Disconnect power and shut off water before servicing
• Use a T20 Torx driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent stripping
• Wear cut-resistant gloves; sheet-metal edges can be sharp

This is the clear glass that sits atop the crisper/vegetable drawers, creating a sturdy shelf and sealing the bins to help maintain proper humidity. Replacing damaged glass restores a flat, clean surface for food storage.

• Forms the shelf surface over the crisper/vegetable drawers
• Helps seal the produce bins for better moisture control
• Replace if cracked, shattered, sagging, or missing
• Common symptoms: broken glass, unstable or uneven shelf, items tipping in the crisper area

• Unplug the refrigerator and wear cut-resistant gloves
• Remove food from the shelf, lift out the old glass carefully
• Clean the frame/ledges before setting the new glass in place
• Ensure the glass is fully seated and supported on all edges

This vegetable pan support assembly holds and guides the crisper/vegetable drawer so it opens smoothly and keeps the cover/shelf above level. Replace a damaged support to restore proper drawer alignment and prevent sagging or sticking. What it does:

• Supports the crisper/vegetable drawer and the cover/shelf it rides on
• Maintains level alignment to reduce binding, scraping, or tipping
• Provides a stable track point for smooth drawer movement
• Common symptoms: drawer tilts, binds, or falls; shelf sags; visible cracks or broken tabs on the support

• 1 vegetable pan support assembly

• Unplug the refrigerator before servicing
• Remove the crisper drawer and cover/shelf to access the support
• Match the new support's orientation to the original; transfer any reusable hardware if applicable
• Seat the support fully and securely before reinstalling the cover/shelf and drawer; test drawer travel

The Vegetable Pan is an OEM part for GE refrigerators. It is designed to fit snugly in the refrigerator's compartment, providing a dedicated space for storing vegetables and fruits. This pan helps maintain an optimal humidity level, which is crucial for preserving the freshness and extending the shelf life of produce.

Symptoms of a failing vegetable pan include:

• Cracks or damage that compromise its structural integrity.
• Difficulty fitting the pan into its designated slot.
• Excess moisture accumulation that indicates a seal failure.

The primary causes of damage to the vegetable pan often stem from overloading with produce, frequent removal and replacement, or accidental impacts during cleaning. These can lead to physical damage or wear that affects the pan's functionality and effectiveness in maintaining the proper environment for stored items.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.