Parts for Ge GTH18DBRORBB: 05 - Fresh Food Shelves Parts

This shelf cantilever wire assembly replaces a bent or broken refrigerator shelf support to restore stable shelf placement and weight-bearing capacity. It helps keep shelves level and prevents items from shifting or falling. What it does:

• Supports and secures a refrigerator shelf at the side wall mounting points
• Replaces worn, bent or broken cantilever supports that allow shelves to sag or drop
• Restores correct shelf height and alignment for safe storage
• Helps eliminate shelf movement and uneven loading that can cause spills

• Unplug the appliance or disconnect power before servicing to reduce shock risk
• Remove food and any items from nearby shelves before replacing the part
• Handle edges carefully; use basic hand tools to remove and install the support as needed

Restore a smooth-sliding, organized crisper area with this clear vegetable crisper drawer set. It replaces a cracked or missing bin so produce stores properly and the drawer tracks engage as intended. What it does:

• Holds fruits and vegetables in the crisper compartment
• Slides on the refrigerator's crisper rails for easy access
• Works with the crisper cover/humidity control to help manage moisture
• Common failure signs: cracked corners or front, broken tabs, drawer sticks or won't seat correctly

• One clear vegetable crisper drawer assembly

• Remove contents; pull the old drawer straight out and lift over the stops
• Inspect rails and the crisper cover; replace if damaged before installing the new bin
• Align the new drawer with the slide rails and push straight in until it stops
• Handle by the sides to avoid stressing the front/handle area

The Vegetable Drawer Cover Frame is an OEM part for GE refrigerators. It serves as a supportive structure and shelf for the crisper drawers, helping to maintain organization and accessibility within the refrigerator. This frame also helps to seal the vegetable drawer area, preserving the humidity and temperature that keep your fruits and vegetables fresh longer. This is just the frame and does not include the glass.

Symptoms of a bad Vegetable Drawer Cover Frame include:

• Cracking or breaking of the frame, which may cause the drawers to sag or not close properly.
• Difficulty in sliding the drawers in and out due to misalignment caused by a damaged frame.
• Visible warping or deformation of the frame, affecting its functionality and appearance.

Causes of a bad vegetable drawer cover frame can include heavy loading that exceeds the frame's weight capacity, impacts from moving the drawers in and out, or environmental factors such as moisture that can weaken the plastic over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a half-width cantilever shelf for the refrigerator's fresh food compartment. It mounts on the rear wall rails to create adjustable storage space and replace a cracked, sagging, or missing half shelf.

• Provides adjustable storage; hangs from rear wall tracks
• Replaces a shelf that is cracked, warped, unstable, or missing
• Helps restore proper organization and usable space
• Maintains correct fit and support for refrigerated items

• Unplug the refrigerator and remove food from the area before starting
• Lift and slide the old shelf out of the wall rails; install the new shelf into the same slots
• Inspect wall rails and supports for damage before reuse
• Handle carefully to avoid chipping edges or scratching liners

Replacement cantilever half glass shelf that restores a flat, easy-to-clean storage surface inside the refrigerator. Provides a stable platform for containers and replaces a cracked, chipped, or missing shelf. What it does:

• Provides a flat, sturdy surface for storing food and containers on refrigerator shelving rails.
• Slides into existing cantilever shelf supports for quick replacement.
• Restores full usable shelf space after a broken or missing glass shelf.
• Helps contain small spills on a smooth, easy-to-clean surface.

• Remove all contents from the area before installing and place on a padded surface to avoid damage.
• Handle with care and wear cut-resistant gloves; glass edges may be sharp if broken.
• Slide the shelf into the existing side supports until fully seated; do not force if misaligned.
• Dispose of any broken glass safely and check that supporting rails or brackets are intact and secure.

This front glass shelf trim restores the finished front edge of a refrigerator glass shelf so items stay put and the shelf looks tidy. It replaces a cracked, chipped or missing front trim to help keep the glass seated and stable. What it does:

• Covers and secures the front edge of a refrigerator glass shelf for a finished appearance.
• Helps prevent items from sliding off the shelf and reduces exposure of the glass edge.
• Replace if the trim is cracked, broken, loose, or missing and allowing the glass to shift.
• Designed to snap or slide into the shelf channel and hold the glass front in place.

• Remove food and glass shelf before replacing trim; handle glass carefully to avoid breakage.
• Press the trim into the shelf channel until it seats; some models use clips — avoid forcing parts.
• If glass is damaged, replace the glass and trim together.

This rear glass shelf trim replaces the finished glass edge at the back of a refrigerator shelf, restoring a secure seat and clean appearance. It helps keep items from sliding off and reduces gaps where spills can drip. What it does:

• Provides the finished rear edge and support for a refrigerator glass shelf.
• Helps the shelf seat and lock into position; a broken or missing trim can prevent proper seating.
• Reduces food/items from shifting toward the cabinet rear and helps contain minor spills.
• Restores appearance when the original trim is cracked, chipped, or worn.

• Handle the glass trim carefully; wear cut-resistant gloves and eye protection during installation.
• Remove the shelf per the appliance's OEM instructions before replacing the trim, then refit the shelf and verify it seats properly.
• Inspect mounting clips or supports and replace if damaged to ensure a secure fit.

The Snack Pan Slide is an OEM part for GE refrigerators. This part provides a smooth track for the snack pan or deli drawer to slide in and out, ensuring easy access to stored items.

Causes of a bad snack pan slide can include regular wear and tear, damage from overloading the drawer, or breakage due to improper handling.  

Symptoms of a bad snack pan slide include:

• Difficulty opening or closing the snack pan
• The snack pan not sliding smoothly or getting stuck
• Visible cracks or damage to the slide
• The snack pan not staying aligned or securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This left side snack pan slide is a genuine General Electric part, sold individually. This left side snack pan slide can be used as a replacement part for a refrigerator. This is the part on which the crisper drawer rests, and it facilitates the sliding in and out of the crisper drawer. The left side snack pan slide is made out of durable white plastic.The left side snack pan slide might have to be replaced at some point within the lifespan of a refrigerator if it is damaged to the point that it can no longer serve its function. This damage could take the form of cracks, punctures, or erosion to the plastic material as a result of general wear and tear or from a collision with a hard object that warps the component beyond functionality. If either of these things occur, the component should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This left side snack pan slide is compatible with the following appliance brands: General Electric and Kenmore.

8-18 CA HX 1/2 S